97 Prelude brake Conversion

[Accrdkid]

Ok

I was recently thinking about the 97 Lude, I remember seeing a picture of a Cb7 with a 5 lug setup. I was eyeing a set of Foose Wheels for a 97 Lude with a 5 lug setup.

My Question is...

Is it easy to convert the Cb7 to have 5 lugs?

[HondaFan81]

you need a 5-lug hub with bolt-pattern same as a 97 prelude and this hub needs to line up (able to go into wheel bearing unit bore & have 4-bolt holes line up) with the Accord wheel bearing unit, because this wheel bearing unit lines up to your knuckle and is fastened by them 4-bolts.

If you can get a hold of or have someone measure a 97 prelude hub on the end where it goes into the wheel bearing unit..get that outside diameter and then measure the inner diameter on ur Accord wheel bearing unit..has to press-fit OR just compare the 97 prelude hub to a 90-93 Accord hub...You would obviously need 97 prelude brake rotors (cuz now u converted to rotor-over-hub) and prelude calipers and brackets.