egr block off plate

[wed3k]

made out of aluminum, took 30 minutes.

http://www.reaction-image.net/albums/album1155/100_2532.sized.jpg

[93twodoorLX]

you should make 25 of them and sell them at 20 a piece make some change off of that shit lol looks really good compared to the DIY one i made. mine is more like, "f it, it blocks the port and you never see it" kinda thing lol are you gonna just bolt your EGR valve back on top of it and leave it plugged in so your dont throw a CEL? thats what i did, works fine...no CEL

-sean

[wed3k]

you should make 25 of them and sell them at 20 a piece make some change off of that shit lol looks really good compared to the DIY one i made. mine is more like, "f it, it blocks the port and you never see it" kinda thing lol are you gonna just bolt your EGR valve back on top of it and leave it plugged in so your dont throw a CEL? thats what i did, works fine...no CEL

-sean

at 20 bucks a piece and it take me 30 minutes = $40/hr for mass production. i make 50 an hour doing maintainence work.

this was for a h22 swapped coupe that runs a P28 so we dont need EGR. ive made plates that go under the egr valve, my project and my DD run egr block off plates,

[Shay91Racer]

at 20 bucks a piece and it take me 30 minutes = $40/hr for mass production. i make 50 an hour doing maintainence work.

this was for a h22 swapped coupe that runs a P28 so we dont need EGR. ive made plates that go under the egr valve, my project and my DD run egr block off plates,

$50 an hour? bro what do you do? i need to be like you when I grow up lol. Auto Tech tho...

[GHOST 2.2]

my dad made a few of those for me when i was running the p28 on my cb.

[wed3k]

$50 an hour? bro what do you do? i need to be like you when I grow up lol. Auto Tech tho...

i do autmotive maintainence work on hondas...thats what i charge 50/hr and i dont have any overhead. the customer's are getting a heal of a deal and i pocket all cash.

[slick]

can you make me one? :shrug:

[d112crzy]

KMS sells them for 12 shipped on ebay.

[wed3k]

KMS sells them for 12 shipped on ebay.

which is why i dont mass produce one. hard to compete with a chromed at KMS one.

[cali-racer]

<-- has 1 of few wed3k egr block off plate.

wed3k=god

[weldingtodd88]

hey guys this may sound like a stupid question but what is the point for blocking the egr?:confused:

[wed3k]

<-- has 1 of few wed3k egr block off plate.

wed3k=god

thats my stage one egr block off, to still retain the stock egr. this one was for dany0 and hes going to run that p28 which completely eliminates egr.

we run egr block off plates because California emissions is a bunch of fucking bullshit, just like the rest of this fucking place.

[cali-racer]

:thumbsup:

[slick]

hey how much would you charge me for one though? kms soesn't have anything for sale on ebay now.

[tommi]

i've made a few of these in the past. it's a quick and easy mod. :tu:

[slick]

i want to do it but cannot find one :shrug:

[accordaffair]

You should make an air boost block off too

[wed3k]

i can make some and maybe mock up a design for the air boost block off. i havent really torn into an airboost block off so im not sure how'd it look.

ill try to get around to it this sunday if i come back from my road trip in time. :tu:

[slick]

well let me know if you can make me a egr block off plate. i cannot find one anywhere

[wed3k]

well let me know if you can make me a egr block off plate. i cannot find one anywhere

also are you looking to retain the egr valve so you can eliminate the code or do you have an aftermarket ecu that will handle the absence of an egr setup?

[slick]

also are you looking to retain the egr valve so you can eliminate the code or do you have an aftermarket ecu that will handle the absence of an egr setup?

no aftermarket ecu just stock. i just want a block off plate.

[slick]

and an air boost block off valve if you could make one of those :tu:

[wed3k]

and an air boost block off valve if you could make one of those :tu:

http://www.reaction-image.net/albums/album219/7_45.sized.jpg

the only bum thing is that you'll have to find shorter bolts for the air boost, i screwed up on the thickness of it but oh well. it was my prototype.

[slick]

looks really good now about the egr one too?

[wed3k]

looks really good now about the egr one too?

what about it?

[slick]

what about it?

wanna make me one of each?

edit i thought the air boost valve was in the front?

[wed3k]

wanna make me one of each?

edit i thought the air boost valve was in the front?

air boost is on the side, IACV and FITV are on the front. that picture is from today, i already made them both.

[accordaffair]

He's thinking a6 vs h23, h23 has a front air boost, front eacv, fitv is under the TB

a6 has like you said, front fitv, eacv, side air boost

[wed3k]

it fits both nonetheless, i just put it on a h23 plenum./

[wed3k]

of course when the plates are done, the buyer doesnt want to buy them.

[steelbluesleepR]

i made myself a set of plates for my h23 intake manifold and i am really happy with them. i just need to get a tune so i can use the IACV block-off plate without my car sounding like crap or zip-tying the part out of the way. here is the finished product:

http://c4.ac-images.myspacecdn.com/images02/42/l_ce56a8597caf4a7db7efd54ece9e31e3.jpg

[slick]

of course when the plates are done, the buyer doesnt want to buy them.

ill buy them

[19dabeast85]

of course when the plates are done, the buyer doesnt want to buy them.

I'll buy an air boost valve block-off plate also! Please PM me a price!

[slick]

already paid for them both but if i cannot use the block off valve ill pm you since i have an h22 throttle body and plenum now

[19dabeast85]

already paid for them both but if i cannot use the block off valve ill pm you since i have an h22 throttle body and plenum now

If you got the jdm plenum, it comes with the OEM block-off for the boost valve. But if usdm, the boost-valves are all the same between the F/H series so it'll work.

[steelbluesleepR]

If you got the jdm plenum, it comes with the OEM block-off for the boost valve. But if usdm, the boost-valves are all the same between the F/H series so it'll work.

the EGR is the same too.

[TheNextAZN]

going to polish the egr plate wes had made for me ... hmm if you sell these wes, and members want them to be polished.. send 'em my way i'll polish and u can charge more!!! lol:p

anyways, i'm most likely going to CAD the plate u made me, so you can have a file to reference, maybe oneday i'll get a Haas mill to myself and a butt-load of aluminum:bouncy:

[wed3k]

going to polish the egr plate wes had made for me ... hmm if you sell these wes, and members want them to be polished.. send 'em my way i'll polish and u can charge more!!! lol:p

anyways, i'm most likely going to CAD the plate u made me, so you can have a file to reference, maybe oneday i'll get a Haas mill to myself and a butt-load of aluminum:bouncy:

the mill cutting tool pattern is badass too.

[93accordexcoupe]

hey wes do u have a diagram of the plate? i want to fab one up here at school. 200 miles from my car :(

[T3aM 83rD]

i made one out of a piece of sheet metal, bolted it down and started up the car. It didnt work out too well, I had a big vacum leak. I just connected back the egr till i come up with a better plan.

Heres a quick question, there is a hose that connect to the top of the egr that run across the motor to-top of the fuel rail. What do you guys do with that hose? Also that circuilar think that the hose connects to (on the driverside), what the prupose of it?

[steelbluesleepR]

i made one out of a piece of sheet metal, bolted it down and started up the car. It didnt work out too well, I had a big vacum leak. I just connected back the egr till i come up with a better plan.

Heres a quick question, there is a hose that connect to the top of the egr that run across the motor to-top of the fuel rail. What do you guys do with that hose? Also that circuilar think that the hose connects to (on the driverside), what the prupose of it?

are you talking about the round thing bolted to the fuel rail? that is the fuel pressure regulator.

as for the sheet metal block-off, it would only work if you bolted the EGR back on top of it, otherwise you'd need something thicker, like aluminum plate. also, dont forget to seal it with some instant-gasket sealer.

[wed3k]

hey wes do u have a diagram of the plate? i want to fab one up here at school. 200 miles from my car :(

i just copy them from an egr gasket.

[T3aM 83rD]

are you talking about the round thing bolted to the fuel rail? that is the fuel pressure regulator.


No, theres a rubber hose that connects to the top of the egr, that hose turns into a hard line that runs on-top of the fuel rail, then on the driverside it connects to a little cylinderical (sp?) looking thing.