Pressed out rotors install problem

[SoySauceCb7]

Ok so i have pressed out the hubs on both the knuckles, and now i have the bearing, when i press out the old bearing do i need to press in the hub into the new bearing? I hope it fits in without needing to be pressed in.

[aero]

Yeah, the new one will have to be pressed in. You always can hit them in w/a hammer and a piece of wood between it. Just make sure it goes in straight.

[Maple50175]

i need to do my rotors soo bad. The whole car shakes when i brake it sucks

but i have to take the whole thing apart so i can have a shop take the rotors off ;(


It sucks:cry:

[SoySauceCb7]

yeah man i pressed them out with a socket, lol but when i pressed them in the bearing wanted to split so it became loose, now im not going to hammer it more and going to get it pressed in the right way.

[BustedLX]

Using a hammer seperates the bearing and damages it. In the best case senerio you'll only get a hum coming from the wheels.