Removing 5th gen speakers (same as 4th )

[xplode]

i believe they are the same for removing the rear speakers.. neway i got 6x9's back there and i removed the cover,, i noticed the speakers are held in with some odd type of screw.. the kind i dont have a screwdriver for eh... seems to be some type of hex screw or star shaped.. i had a stardriver but it didnt fit, was a size too big.. wondering if aynone had this problem before

[cp[mike]]

u could try wedging a normal flathead screwdriver between two of the star's spokes, it works as long as the screw isnt in too tight.

[accordztech]

i told u its a hex screw...if not do what cp mike told u...thats what i told you as well.

[92Jr]

ok once u remove the speaker cover, there should be like a 8 mm bolt holdin in the rear speakers. i done this all the time if it ain't no 8 mm bolt under the rear deck holdin the speaker in then some 1 changed out the screws and bolts. from what u r tellin me its a hex screw in there and u just need 2 find the right size thats all.

[accordztech]

you do know thats its a 5th gen right?

haha xplode, go to sears, buy a set of hex screws....when ur done..return it haha...just say u got the wrong ones

[92Jr]

Originally posted by accordztech
you do know thats its a 5th gen right?

haha xplode, go to sears, buy a set of hex screws....when ur done..return it haha...just say u got the wrong ones yea i know it a 5th gen.

[accordztech]

haha ok, the thing is, his pops is the origional owner who didnt touch the screws...so thats why im thinking....how is it hex...