MINI MEET (dfw mini meet)

[gdout90accord]

well im thinking of having a mini meet when me and todd put on my extra f22b head on but not sure on how many ppl will show up, i dont really want dat many ppl haha my moms house is small :thumbsdwn so every1 is probly gonna chill in da garage while we do da HEAD SWAP...... it be nice if you guys help us out too lols ... :bouncy: well let me know if whos coming guys and oh yea we doing the head swap on da 22nd this month (jan 22)

jan 22nd at my moms crib and no i dont live der lols
heres my address....
816 levelland dr. arlington tx 76017

[Bboy_Trevstuh]

You got a mapquest, don't you stay by qwok pham?

[iamanonymous]

well im thinking of having a mini meet when me and todd put on my extra f22b head on but not sure on how many ppl will show up, i dont really want dat many ppl haha my moms house is small :thumbsdwn so every1 is probly gonna chill in da garage while we do da HEAD SWAP...... it be nice if you guys help us out too lols ... :bouncy: well let me know if whos coming guys and oh yea we doing the head swap on da 22nd this month (jan 22)

jan 22nd at my moms crib and no i dont live der lols
heres my address....
816 levelland dr. arlington tx 76017
dude your parents house is not small...

[NAiL05]

Ill see if i can stop by that day and help out if im not busy with school.

[gdout90accord]

its a sunday so if any1 not busy we can use some extra hands hehe

[Backfire32]

i can probably make it.

[Bboy_Trevstuh]

I will be there also!

[Boost_Lee]

i cant make it, but should record the process n make a video...

[gdout90accord]

make a video? of the head swap? or the mini meet haha

[Smokinspeeds]

HEh Xactly. VId Vid Vid!!! SOMEONE had a video camera in there kitchen for at the last meet but when we were talking about it on the thread didn't mention it at all. I don't think it would have been hard to get a volunteer to buy an extra tape if his turbo setup *coughs*hint*coughs* was leaving him broke. I have a TV CARD in my computer and I can upload from a vid camera so no scuses we can take a long vid and I'll upload it and let someone with non-dialup upload it :-P
Will try to be there with my boy who just got his accord cause his head is probably going with a little bit of oil leakin so watching would be good...

[Lantis]

I could probably make it, but my car is a POS. :p

[turboh22accord]

id go but im not up for the drive it would suck to drive up there

[bobertjuan]

uh... i would like to go, like i was sayin for that last meet in texas a couple months ago, i would like to go just to see other peoples cb7s.

[NAiL05]

I might be able to stop by but not for long. I gotta head back to campus same day also. What time do you guys plan to have the meet at? I could prob stop by for an hour or so before i leave. I can bring some extra tools if you guys need any just let me know what you need : extra socket sets, torque wrench etc etc. I really dont feel like lugging my tool box back to Dallas from Waco and back again.

[gdout90accord]

I might be able to stop by but not for long. I gotta head back to campus same day also. What time do you guys plan to have the meet at? I could prob stop by for an hour or so before i leave. I can bring some extra tools if you guys need any just let me know what you need : extra socket sets, torque wrench etc etc. I really dont feel like lugging my tool box back to Dallas from Waco and back again.

hey you say u got a torque wrench? if u do come reall early.... let me know how early u can come so i can tell todd...... cuz we need some torque wrench and who ever that can help out come early :thumbsup:

[drag_on]

well it would be pretty awesome to see everybodys cb7's i kno ill be there if itz kool...i wouldnt kno anybody but im all up for it but around wat time is everyone gathering?

[NAiL05]

Yea on Sundays i will be able to come in the morning. Usually i leave sometime in the afternoon around 2-3 ish. What time will you guys be up? O yea might be a while since i gotta find the place too ha not familiar with the Arlington area.

[Backfire32]

hey i say after this meet we roll out the texas raceway since its not to far from here and run are cars!

[gdout90accord]

dats kenedale..........................

[Backfire32]

lol that is kenedale! now slap ur self man. :bouncy:

[gdout90accord]

hahah wtf lols why cant you just say kennedale biatchhh lols

[Lantis]

So it's Jan 22nd at what time?

[1993sE]

sure ill make it down juss gatta know the time ... :tu:

[NAiL05]

Some track time sounds good at the meet. But do they open to the public during the day? If so how much they charge to enter and run over there?

[Backfire32]

http://www.texasraceway.com/

if it hasn't chaged its 10dollars for watching or racing, and haven't looked but it usually opens at 5pm to street cars to run and usualy ends around 10pm.

[Smokinspeeds]

I think itt's like $5 $10 a run depending on they day/time of day.. I'd like to run myself and maybe see if my boy who just got one wants to see what his stock f22a4 will run(auto) I know with my gtech ive done a couple 16.7's quarter... too bad kennedale is only 1/8th. Neways yeah just post what time you want us to meet up :thumbsup:

[Smokinspeeds]

Wonder if it's per person or per car? Cause they said ladies get in free... get a girl to drive the car and we're in :tu:

[Backfire32]

its 10 a person and after 5pm its as many runs as u can make.

[Lantis]

I might actually wanna run, just to see what it runs.. lol..

[NAiL05]

Damn if it opens that late i might not be able to run my accord. O well im gonna make some preliminary runs this weekend at the track down here and see what i run. Actually thats a maybe need to rotate tires and need to camber out my front tires since im wearing out my insides bad.

[gdout90accord]

Damn if it opens that late i might not be able to run my accord. O well im gonna make some preliminary runs this weekend at the track down here and see what i run. Actually thats a maybe need to rotate tires and need to camber out my front tires since im wearing out my insides bad.

ay did you get my pm? and do you have the torque wrench? you betta come too :bouncy:

[NAiL05]

Haha yea i got your pm. Ill try my best man unless i get lost then im fucked. Like last time when going to Todds place yahoo maps blows ass.

[bobertjuan]

so hey gdout90accord, is this an private party? or is everyone welcome?

[gdout90accord]

everyone is welcome ofcourse....... but not during we doing the head swap, cuz i dont want alot of ppl at my moms house .... but yea every1 is welcome after the swap hopefully we be done by 4 or 5 in the afternoon.... :bouncy:

[Backfire32]

what time u guys starting to do the swap? well if u guys are going to be done round 4 or 5ish why don't we just all meet at the track? :shrug: and if anybodyelse need to find out how to get to the track just tell me and i guess i could meet at the tcc south camputs parking lot then roll out as a group to the track?

[Lantis]

what time u guys starting to do the swap? well if u guys are going to be done round 4 or 5ish why don't we just all meet at the track? :shrug: and if anybodyelse need to find out how to get to the track just tell me and i guess i could meet at the tcc south camputs parking lot then roll out as a group to the track?

sounds like a plan :tu:

[ACCORDianate]

Why are all the DFW meets on weekends that I cannot get out of working? ;)

[Bboy_Trevstuh]

How about we meet up at hooters off of I-20 and little road and than head out to the track! Let the hott grlz see the CB7z.

[Lantis]

How about we meet up at hooters off of I-20 and little road and than head out to the track! Let the hott grlz see the CB7z.

Isn't that in dallas? or are you talking about the one just west of parks mall? or something.. I dunno where little road is lol..

[Bboy_Trevstuh]

Yep the one west of the parks mall!

[Backfire32]

who cares about the cars i want to see the grls! :bouncy:

[NAiL05]

Boobs > Cars...thats the truth lol. Anyway i dunno i might leave a lil later that day im thinking bout rolling out to the track but then i dont feel like driving back to Waco at night and waking up at 8AM next day for class.

[gdout90accord]

Boobs > Cars...thats the truth lol. Anyway i dunno i might leave a lil later that day im thinking bout rolling out to the track but then i dont feel like driving back to Waco at night and waking up at 8AM next day for class.

you gonna let me borrow your torque wrench right? :bouncy: :bouncy: and come early mang id apreciate it if you help out ...... :tu: thanks

[NAiL05]

Yea im gonna try to be there around the times you sent me. Thats all you guys need right?

[Smokinspeeds]

Why don't we just meet at fry's after since it's right by gdout's house in the first place and nobody will get lost??? :tu:

[gdout90accord]

Yea im gonna try to be there around the times you sent me. Thats all you guys need right?


pmed you mang

[NAiL05]

A 3/8 overall should do. I will bring my 3/8" and 1/2" set since i do have a 1/2" breaker bar which should take place of that pipe. I should be able to provide those tools you listed man. BTW my torque wrench is a 3/8" goes up to 100 ft/lbs so that should do.

[gdout90accord]

A 3/8 overall should do. I will bring my 3/8" and 1/2" set since i do have a 1/2" breaker bar which should take place of that pipe. I should be able to provide those tools you listed man. BTW my torque wrench is a 3/8" goes up to 100 ft/lbs so that should do.


aites aites koo hopefully u show up lol

[gdout90accord]

ok just wondering if any1 need some parts off of 90accord ex cuz B INKY is parting out his accord so if you guys want to go to his house n look at some parts you might need let me know heres his thread

http://www.cb7tuner.com/vbb/showthread.php?t=37408&page=1&pp=20

[Backfire32]

yah i want to know what binky wants for the front bumper not the cover or lites just the bumper.

[iamanonymous]

yah i want to know what binky wants for the front bumper not the cover or lites just the bumper.
ask him im sure he'll give you a good deal. money talks louder than words. i'd shoot him an offer he's a good guy.

[Backfire32]

yah i have i think he hasn't had time to respond yet or somtin

[gdout90accord]

dont worry you can ask him sunday if he dint respond yet...i told him bout this mini meet we having :tu:

[gdout90accord]

ok guys sunday is almost up and whos gonna be at the meet? every1 can come at my house by 2 or 3pm..... and if we aint done working on my car yet you guys have to wait ahhah :tu:

heres my address agian 816 levelland dr. arlington tx 76017
and if you guys get lost heres my cell 817 975 3961 :bouncy:

[Backfire32]

i be there round the time i told u unless im still gettin z's.

[Lantis]

street fury is in town filming.. if we had a bunch of nice cars we could roll out as a CB7 crew and shame those ricers..

oh well. I might be there, depends if my car decides to work or not :shrug:

[NAiL05]

Too me street fury is ***. I dont really like the black dude that hosts that video series (dunno if its the same shit they host on G4 TV, but i should be there the time you told me its a bit early but i should make it.

[Lantis]

Yeah it's the one they show on g4, I think it's *** too, but you can't beat the free publicity.

Anyways, it's raining, so it's gonna suck to try and take pictures cause all our cars will be dirty. :thumbsdwn

[1993sE]

so are we still doin this or what...?

[Lantis]

so are we still doin this or what...?

I guess so.

[Backfire32]

well track is closed cause rain guess we have to make a new track date.

[Lantis]

Or just run on the street? find a quarter mile stretch and buy some dollar store stopwatches. :shrug:

[NAiL05]

Damn another unsuccessful meet where no one showed up except like 5 people. Does that qualify as a meet? =D At least the F22B is kickin somewhat.

[mrhonda]

Dammit, I missed another one! I guess I need to check this forum more often.

[Lantis]

Damn another unsuccessful meet where no one showed up except like 5 people. Does that qualify as a meet? =D At least the F22B is kickin somewhat.

and we only had 5 CB7s there.

of course it was kinda cold, next time I will bring a little heater. and try to keep us a bit warmer.


I just hope he can get the adjustments made for the car to run smooth.

[Backfire32]

yah i was goin to go but figed, it would be lame cause the weather.

[Lantis]

yah i was goin to go but figed, it would be lame cause the weather.

It was a little cold, but it was still pretty fun.

[Smokinspeeds]

YEah but John didn't want to many ppl at his house anyways.

For the finding a street thing, :bouncy: , There are a number of good roads by my house where I test for 1/4 mile. PLUS I got a G-tech (old-skool) to measure HP+ 1/4 mile. Only done like 4-5 1/4 mile runs with it. Got a 16.77 and 16.71 and the latter I hit the breaks right before finishing so I woulda had a good <16.5sec run. Perty good for auto tranny with muffler and short ram air!!!!! That and I'm consistently getting 125-129hp readings. If the 20-25% loss in HP with auto vs. man. is true all I gotta do is swap to a stick and I got conservatively 160hp+ :tu:! I haven't even put on my DC sports headers! (waiting for darn cat conv. to get here)

Ya some1's gonna call bs on my numbers but b4 you do the engine is rebuilt with less than 120k ttl miles...

[SleepersOwn]

I'm not trying to call bs, just a lil bit of inaccuracy. As far as i've heard the gtech is only reliable/useful against itself. Meaning, you take your base time, then whatever mods your going to do and then run again..that will tell you how fast you've actually gotten. I've seen ppl run 15.0's on the g-tech and run high 15's close to 16's at the track. What was explained is that it includes r/t for some reason ? I'm not entirely sure but i'm just saying don't go thinking your gonna get close to 160hp from a manual swap with just a hot air intake.

I think you should be content if you see 130-135hp ( i think 140 could be possible with an atcual full exhaust ) from the just a header. It's cool, we'll probably be learning to drive stick around the same time lol. :thumbsup: