PDA

View Full Version : Taillight gasket?

Blk EX Coupe
02-19-2004, 09:27 PM
I have a 93 Ex coupe and theres a leak causing water to get on my bulbs. :( Does anyone know where i can find a gasket for my tail lights. To go inbetween the tail light and the frame.
Wallace
02-20-2004, 02:19 AM
honda dealership.
and i think they're pretty cheap.
JailBa8
02-20-2004, 12:28 PM
Make your own use a mouse pad the thick one. Take the old one use it as a template to cut the mouse pad
aero
02-20-2004, 12:31 PM
Yeah, either mousepad or the cheap gaskets @ honda work. Just make sure to get ones for the inners/outers cuz they gave me the wrong ones, and they didnt quite fit right.
Blk EX Coupe
02-21-2004, 01:37 AM
i'll probably just buy one because i cant find any mouse pads. How hard is it to remove the tail lights?
Blk EX Coupe
03-13-2004, 04:34 PM
i finally got around to going to the dealership and they wanted $23 for each side...:shocked:
Prez808
03-13-2004, 04:54 PM
Originally posted by Blk EX Coupe
i finally got around to going to the dealership and they wanted $23 for each side...:shocked:

www.hondaautomotiveparts.com ?
Blk EX Coupe
03-13-2004, 05:07 PM
Originally posted by Prez808
www.hondaautomotiveparts.com ?

13.59 for each one...Before shipping charge - Subtotal $59.31
i'd be better off buying from the dealership
accordzoom
03-13-2004, 05:30 PM
easy to remove tails..just removed and re-installed a couple sets yesterday
,if you need , PM me and ill write something up for you, if you cant find any
TSA
03-13-2004, 09:17 PM
Originally posted by Blk EX Coupe
i'll probably just buy one because i cant find any mouse pads. How hard is it to remove the tail lights?

You know that mousepads are only like a buck or two at pretty much any large retail chain and even at small mom/pop shops.
Blk EX Coupe
03-14-2004, 12:50 AM
Originally posted by TSA
You know that mousepads are only like a buck or two at pretty much any large retail chain and even at small mom/pop shops.

I didn't think the gaskets would cost that much... i might just do the mouse pad thing instead..
bda91acc
03-29-2004, 07:13 PM
mousepads? DAMn thats a good idea. I walked all around home depot today looking for something to make those gaskets with. All I could come up with was some foam insulation for pipes, but it was too small..

I will be doing the mousepad thing tommorrow and take pics!
accordzoom
03-29-2004, 07:58 PM
have a couple gaskets for like 5+shippin if anyone needs em