Whale wing

[4thGen4dr]

Has ne body seen the whale wind by ground designs? That shits looks hotI think nebody with a kit, this wing is the only one to have. Wut u guys think?
http://www.customautotrim.com/bodykits/black-widow-street-fyghter/black-widow-accord-90-93-pics/03.jpg

[phatdoughnut]

WTF? you mean black widow wing? cause that is the only one they have on there...

[akkordlayinkit]

I actually ordered the generic Black Widow I wing (hybrid? from nopi) and was gonna mold it to the trunk, but it was cracked when I got it, and it was for a civic...and after waiting about 4 months I finally got my money back, and then by that time decided to go clean trunk.

Jay

[Trites]

is it just me or is there a direct correlation between big fat bodykits, and tezza tails lights? not that its a negative thing...some people like it.

[4thGen4dr]

I m pretty sure thats wut that type of wing is called cuz iv seen it on my friends SI and prelude and thats wut they call it.NE ways it hot.

[chessboxer]

too bad a whale wing does no good on a fwd car.

[MRX]

are we talking about this? cause they first link didn't link to ish.

http://www.customautotrim.com/bodykits/black-widow-street-fyghter/black-widow-integra-94-01-pics/i.jpg

[4thGen4dr]

Yea, that,copied the wrong link but thats it. I think it would nice with acclayinkit's

[phonts69]

that wing is HOOOTT! i wanted to get it, but put it off for building my new computer instead.:D

[MRX]

i do, and have agreed for the longest time that the bw wing is the only wing to buy...especially for me...even looks good without a ground effects kit

[sts2poc1]

ive been thinking of doing that for along time now but never had the money, i personally would've went with an aerogear one since they don't have the little things in the middle

i tryed fitting an ae86 coupe spoiler on mine, but too lazy to do the work, and didn't want to get it done either

[Sho Nuff]

I like Phonts wing better. I might get one like his.

[phonts69]

Originally posted by Sho Nuff
I like Phonts wing better. I might get one like his.

thanx, but mid wings were the fad years ago when i got it.
the thing is hella heavy too. maybe 30-40 lbs? imagine the thing chopping yer back when yer digging in the trunk!
i might get that grounddesigns2000 wing over the summer when i save some cash.:D

[accord driver]

If you think the midwing is heavy wait till you get the grounddesigns one, it weighs like 50 lbs!!

[phonts69]

Originally posted by accord driver
If you think the midwing is heavy wait till you get the grounddesigns one, it weighs like 50 lbs!!

50 lbs?! that heavy? whats it made out of?

[accordzoom]

dammn, how is that even possible?

[akkordlayinkit]

Originally posted by accord driver
If you think the midwing is heavy wait till you get the grounddesigns one, it weighs like 50 lbs!!

Are you sure, did you somehow get a steel version, because its just fiberglass...and most fiberglass wings that size are about 8-10 pounds...like a stock lude wing. I know for a fact that the knock-off aerogear wing is around the 10 pound range...

Jay

[phonts69]

Originally posted by akkordlayinkit
Are you sure, did you somehow get a steel version, because its just fiberglass...and most fiberglass wings that size are about 8-10 pounds...like a stock lude wing. I know for a fact that the knock-off aerogear wing is around the 10 pound range...

Jay

thats what i thought it was made out of, fiberglass.
maybe accord driver saw the concrete version.:D

[rebels]

I now have a black widow wing already molded to the trunk lid! I am so happy because I've always loved that wing and now i have one molded to the shaved trunk lid. :D

[phonts69]

Originally posted by rebels
I now have a black widow wing already molded to the trunk lid! I am so happy because I've always loved that wing and now i have one molded to the shaved trunk lid. :D

pics? how heavy is it?

[uncle_el]

Originally posted by phonts69
pics? how heavy is it?
rebels' member's ride thread (http://www.cb7tuner.com/vbb/showthread.php?s=&threadid=1040) here.
unsure of the weight.

[phonts69]

Originally posted by uncle_el
rebels' member's ride thread (http://www.cb7tuner.com/vbb/showthread.php?s=&threadid=1040) here.
unsure of the weight.

i didnt see any pic of the grounddesigns wing on his members page. just pics of the midwing. ????:shrug:

[rebels]

Originally posted by phonts69
i didnt see any pic of the grounddesigns wing on his members page. just pics of the midwing. ????:shrug:


Yeah, right now I have teh Wings West Midwing on my car. But, if you all know Howitt, he totaled his 1992 Accord 4-door with a Lexus IS300 headlight conversion and he parted it out. I bought the trunk lid from him. It is shaved just like mine but has teh BW wing molded to it. I will post a picture of it, but yeah, thats the lid going on this summer when I repaint the car and do the H22A swap.

Anyone want to buy a shaved trunk lid with a Wings West midwing?

[rebels]

http://home.woh.rr.com/m60/howitt_two.jpg
http://home.woh.rr.com/m60/howitt_five.jpg

[phonts69]

holy moley, that front bumper is... well....


holely.:boink:

but i love that wing, probably get that later.

[xplode]

Originally posted by Trites
is it just me or is there a direct correlation between big fat bodykits, and tezza tails lights? not that its a negative thing...some people like it.

almost every kit has a set of altezzas.. rofl its true

[Boost_Lee]

hey rebels
how much for that trunk/wing??? Is it wings west thruster wing like phonts?

[4thGen4dr]

Originally posted by phonts69
holy moley, that front bumper is... well....


holely.:boink:

but i love that wing, probably get that later.
That front is.......kinda too much IMO but the back is tight

[4thGen4dr]

Originally posted by phonts69
holy moley, that front bumper is... well....


holely.:boink:

but i love that wing, probably get that later.
That front is.......kinda too much IMO but the back wit the whale wing and the CFhood is tight!

[akkordlayinkit]

Originally posted by rebels
http://home.woh.rr.com/m60/howitt_two.jpg
http://home.woh.rr.com/m60/howitt_five.jpg

I dont like the way that the wing is molded in, or the bumper...but maybe its just the pics dont do it justice. But it looks like the wing is completly flush with the trunk lid, I think it would look better if just the seems were molded that way you would be able to see the shape of the wing...and when I go to mold my rear Im goin to mold it completly smooth, so theres no bumper line visibal. But anyways it'll look real good on your car rebels, I like the that wing better than the mid wing myself, good find. And please tell me that your gonna take the antenna off.

Jay

[rebels]

Originally posted by 4thGen4dr
That front is.......kinda too much IMO but the back wit the whale wing and the CFhood is tight!

He had an Integra front end on the car with the Lexus IS300 headlights. Yes, I am taking off the antenna when I put the trunk lid on my car. He had the CF altezzas because he had a hinged tail light. He's the guy that did my tail light and rerouted my gas line. There was an insurance claim from when he got rear ended so he just kept them. Anyways, the car is no longer in existance.

AccordLayinkit, I am remolding mine so it's completely smooth. The guy that did it the first time thought thats how I wanted it so I just kept it like that.

I am going to sell the trunk lid and wing when I get the new lid put on. I am not sure how much I am going to ask but we will see. Yes, it's idential to the thruster. It's the same as the Wings West midwing and the Thruster.

[akkordlayinkit]

Originally posted by rebels
AccordLayinkit, I am remolding mine so it's completely smooth. The guy that did it the first time thought thats how I wanted it so I just kept it like that.

Nice, thats how Im gonna do mine, no body lines, totaly smooth so it looks like the there is no bumper, like its part of the quater panel. You still gonna go with a diff. rear or keepin the old?

Jay

[rebels]

I am going to keep the same rear bumper but cut it up and fix it so it doesn't bow out like it does. I am going to build a custom bracket and then mold that to the bumper cover and then remold the whole bumper together, then to the body of the car.

[arrozburner]

first off, the ground design black widow 1 wing does not weigh 50 lbs...i just bought mine ($80 bucks and its authentic) and its not heavy at all. i could weigh it but i'll probobly forget to do it by the time i get off of work:shrug: but ive always liked how this spoiler looked on our gen so when i saw the opportunity to get it i just jumped on it...plus the price was the deal sealer, you cant get an authentic ground design anything for 80 bucks. the guy that sold it to me has the BW2 wing for 120 if anyone is interested.

[crazypinoyx]

You have a nice ride but it's a bit too much for me. I just put a mugen style spoiler on my Accord and a black widow body kit all around and it's pretty clean (in my opinion). What do you guys think?

[Wallace]

wow, im usually totally against any spoilers (even the OEM one), but that is sexy.

not a huge fan of the kit though. but that's just me.

[4thGen4dr]

Originally posted by crazypinoyx
You have a nice ride but it's a bit too much for me. I just put a mugen style spoiler on my Accord and a black widow body kit all around and it's pretty clean (in my opinion). What do you guys think?
Is that wing on straight? Lokks aight, love the color

[rebels]

Originally posted by crazypinoyx
You have a nice ride but it's a bit too much for me. I just put a mugen style spoiler on my Accord and a black widow body kit all around and it's pretty clean (in my opinion). What do you guys think?

Color = :boink:
Body Kit = :boink:
Rims = :nono:
Wing = :nono:
Tail Lights = :boink:

[arrozburner]

crazypinoyx: you ride looks nice (post it in the members ride section along with some more pics and mods) but the wing looks off set or is that just the pic :confused:

[phonts69]

Originally posted by arrozburner
first off, the ground design black widow 1 wing does not weigh 50 lbs...i just bought mine ($80 bucks and its authentic) and its not heavy at all. i could weigh it but i'll probobly forget to do it by the time i get off of work:shrug: but ive always liked how this spoiler looked on our gen so when i saw the opportunity to get it i just jumped on it...plus the price was the deal sealer, you cant get an authentic ground design anything for 80 bucks. the guy that sold it to me has the BW2 wing for 120 if anyone is interested.

80 bucks huh? u think i can hooked up like that too? thats cheeeeap!!:D

[arrozburner]

he had it on his car which is why it was painted white with a blue pearl, but he sold his car and had the BW1 and BW2 in his garage so i bought the BW1 for 80 but i think he still has the BW2 which he is selling for 120 i believe...that one is just white with no paint. try email him if he still has it

mugengtr@aol.com

he's located in fountain springs in O.C.

[phonts69]

Originally posted by arrozburner
he had it on his car which is why it was painted white with a blue pearl, but he sold his car and had the BW1 and BW2 in his garage so i bought the BW1 for 80 but i think he still has the BW2 which he is selling for 120 i believe...that one is just white with no paint. try email him if he still has it

mugengtr@aol.com

he's located in fountain springs in O.C.

awww... i like the BW1 wing better, the BW2 sticks out too far.

[crazypinoyx]

the wing is straight on i think it's just the picture that was taken the makes it look that way and also rebels, i just chose those rims and that wing becuz it matched the flow of the car.

[rebels]

Originally posted by crazypinoyx
the wing is straight on i think it's just the picture that was taken the makes it look that way and also rebels, i just chose those rims and that wing becuz it matched the flow of the car.


It's cool man.. don't take that as a negative note. Your car looks really good. I cannot hate on any cb7 people. It's what you like, and you have some of my taste so good job on the ride. Just not diggin' the wing at all but the car is blazing mad styles! ;)

[rebels]

On another note.. it doesn't look like I am buying the trunk lid from the guy I posted pictures of but I just did buy the BW wing from a guy that totaled his cb7. Here are some pictures..

http://images.cardomain.com/member_images/12/web/528000-528999/528010_2_full.jpg
http://images.cardomain.com/member_images/12/web/528000-528999/528010_3_full.jpg

[4thGen4dr]

Wow,looks good from what i can see, I was wondering what it would look like with no kit, MORE PICS!

[phonts69]

i still say that wing is hooottt..

i envy you rebels.
i will get mine this summer. hopefully

[rebels]

Originally posted by phonts69
i still say that wing is hooottt..

i envy you rebels.
i will get mine this summer. hopefully


I like your wing and your car.. your wing looks just like the one I have on and it looks perfect but I can't pass up the deal I paid for this BW wing.

[crazypinoyx]

thanks rebels. but i didn't mean for it to sound like i was mad or something, I was just saying you have your style and I have mine

[rebels]

http://home.woh.rr.com/m60/wing_one.jpg
http://home.woh.rr.com/m60/wing_two.jpg

It's primered and ready to go on once I get back to Dayton, Ohio and mold that bitch to my trunk lid! :D

[phonts69]

cool...cant wait for the pics




btw panda express RULES!!!:boink:

[rebels]

Panda express?

[phonts69]

its in the first pic, cup on the table.

i got eagle eyes!!

[rebels]

Haha, the guy I bought the wing from took those pictures. I didn't know what you were talking about, so you've completely lost me but I see now.

haha

[91accord4door]

i hate that wing on these cars,:nono: :nono: ,i hate how it does not flow.it is making me sick.i like oem better than that.yuck.but thats just me man no offense.it just sticks off the back of the car.lol.:idiots: