PDA

View Full Version : abs insight


pretty_ricky302
09-04-2006, 06:55 PM
ok my abs light has been on for months. So today i took the tire off and what u know the tire chewed at the wire. So i cut the bad part out and spiced it all back together. I took the + off the battery for like 5mins but the light still stays on. I checked all the abs fuses in the abs box there fine. I see theres a relay how can i check that. Also, any other problems that u think could keep the light on?

deckeda
09-04-2006, 11:32 PM
The light itself should tell you by the number of blinks ... provided you jump the service connector, just like when checking for CEL codes. I'd start there.

JDM_EJ
09-04-2006, 11:33 PM
could be tha actual abs sensor on that wheel...

cp[mike]
09-04-2006, 11:39 PM
The light itself should tell you by the number of blinks ... provided you jump the service connector, just like when checking for CEL codes. I'd start there.
yup, turn the ignition on and jump the CEL connector, itll flash the ABS light, count the long and short blips and post up what it is... itll tell you which sensor/piece is failing.

pretty_ricky302
09-05-2006, 07:17 PM
ok how u jump the cel connector i neva done it b4, thats under the pass. carpet right. drop me the link b/c i no thats what u guys are goin to do.

pretty_ricky302
09-06-2006, 02:06 PM
pulled the code, the abs light blinks 4 times pause then once. anyone what this means

pretty_ricky302
09-06-2006, 03:04 PM
goes like this

b.b.b.b...b

cp[mike]
09-06-2006, 03:17 PM
off the top of my head, that should mean one of the front sensors is bad. ill double check when i get home.

pretty_ricky302
09-07-2006, 07:49 AM
ok the wires that i put back together came apart. Put them back together now the light is off, one problem down to many to count left

cp[mike]
09-07-2006, 01:33 PM
ok the wires that i put back together came apart. Put them back together now the light is off, one problem down to many to count left
you should really solder those wires and tape them nice and tight...

pretty_ricky302
09-07-2006, 01:58 PM
ya i no, i just crimp them and tape it up. Hopefully it will hold to i sell her, tryin to fix most of the easy to do problems