CB7Tuner Forums

CB7Tuner Forums (http://www.cb7tuner.com/vbb/index.php)
-   Members' Rides (http://www.cb7tuner.com/vbb/forumdisplay.php?f=42)
-   -   Raf99 : 1993 Accord EX (http://www.cb7tuner.com/vbb/showthread.php?t=139375)

Raf99 07-15-2009 06:33 AM

Raf99 : 1993 Accord EX
 


Big thanks to...
DarkCloud, TypeG, rocketman_471, cb7rush, Theos92VR4(x2), almostJDM, , NightmareCB7, xkjnboix, almostJDM, H23CB7, tommi, 1990[H]accordex, treyd82, dannyd, bmxicansd, STREET-SPEC, 93a-lude, lindiz, DanCan, fleetw00d and many others for the help

**Special HUGE thanks to James at Raven Auto Sports in Halifax, NS for helping build, tune, and bring this monster to life!! Without him this car would not be where it is now!!**


http://clevercomputersolutions.ca/cb.../7-30-2015.jpg

http://clevercomputersolutions.ca/cb...909_191722.jpg


410WHP/296TQ @ 17PSI

Engine

JDM H22A engine
Skunk2 intake manifold
Manual tensioner
Darton sleeves
Eagle H rods
Arias forged pistons (8:5:1)
Cometic head gasket
ARP main studs
Cometic lower engine gasket kit
Endyne oil pump
Greddy timing belt
Greddy balancer belt
Mishimoto half radiator
Mishimoto slim radiator fan
Mishmoto power steering reservoir relocation
H22A 68mm throttle body
MSD Ignition system
Walbro 255lph fuel pump
Internal distributor coil mod.
Battery relocation
Fuse Box relocation
Full Wire tuck
Full A/C delete
EGR/Canister full removal
3" Full exhaust w/ Flowmaster muffler (no cat)
ESP engine mounts
ESP front lower traction bar
ESP 3 point upper strut bar
ESP alternator relocation bracket

Transmission
5 speed T2T4 LSD Transmission with a F23 shaved 5th gear
Tilton twin disc clutch/flywheel/pressure plate
ARP flywheel bolts


Go Gear
GT35R Turbo (.70 compressor, 56trim)
Mishimoto Intercooler
Tial 50mm BOV
Tial 44mm WG
Top Mount 44mm Turbo manifold
Precision 880CC Low Impedance injectors
GM 3bar map sensor
S300 V2 ECU with boost control
AEM fuel rail
AEM FPR
AEM A/F ratio gauge
AEM boost controller
AEM boost gauge
Oil pressure gauge
Oil catch can with 2x10an fittings
H22 valve cover with 2x10an fittings
Fast Turbo feed and outlet turbo lines



Exterior
Tein Super Streets
Braided steel brake lines
Rear disc swap
17" DAI Mirage rims w/215/40/17 +38
EBC Front drilled and slotted rotors and pads
EBC Rear drilled and slotted rotors and pads
Front SPC front camber kit
Rear Ingals camber kit
Fat Four Customs rear LCAs
Fat Four Customs rear toe arms
Ractive rear upper strut bar
Ractive rear lower tie bar
Clear bumper signal lights
JDM mirrors (in USDM housings)
JDM side marker lights
JDM intersection lights, relays and harness
JDM yellow fog light bulbs
Red/Clear Sedan tail lights
EDM rear fog light

CB7 JDM one piece black housed headlights /w
- Yellow high beam shroud
- JDM yellow high beam bulb
- DS2 Mini projectors w/ electronic cut-off shield (theretrofitsource.com)
- Gatling Gun mini shrouds (theretrofitsource.com)
- Phillips 85122 bulbs (theretrofitsource.com)
- 100mm halo rings high beams (theretrofitsource.com)
- 90mm halo rings low beam (theretrofitsource.com)
- Wiring splitters (theretrofitsource.com)
- HID ballast (theretrofitsource.com)
- Headlights shields

80% tint on rear windows and back window
Window visors
Rear window visor
Shaved antenna
Shaved logos
91 DIY front grill
Rear camera DIY into trunk key hole
95 JDM Honda Accord front lip‏
95 Accord EXR rear lip
95 Accord side skirts
Rear upper window visor


Interior

97 Prelude front seats
Dyed black floor mats
Dyed black mat of rear seat
DIY black interior pieces
Black carpet from stockinteriors.com
Complete DIY trunk redo with black fabric
Silver speedo/RPM/cluster rings with color matched cluster background
Momo steering wheel
Full blue LED gauge/dash conversion


ICE

Alpine IVA-D310 In-dash 7" DVD screen
Alpine IVA-D310 brain unit
Alpine I-Pod interface adapter
Alpine MRV-1507 class D 900W OMS
2 x 400W Clarion 10" subs
Alpine Flex5 MRP-F365 amp
Qlogic corner enclosures w/
-Alpine crossovers
-Alpine 300W 6-1/2" 2-Way component speakers & tweeters
Pioneer 180W 6 1/2" rear speakers
Pioneer 140W 5 1/4" front speakers



If you read this far congrats! This list is getting way too long :)

Future Plans

Carbon fiber hood (do not have..)
Carbon fiber trunk (do not have..)
Black Dash (do not have)
Big Brake upgrade

--
http://clevercomputersolutions.ca/cb...521_205134.jpg
--
http://clevercomputersolutions.ca/cb...722_170313.jpg
--
http://clevercomputersolutions.ca/cb...827_185424.jpg
--




----------
------------------
-------------------------
************************From this point below are pics when I started my MRT. As the pages go on, so do the updates and pics
-------------------------
------------------
----------
-----

PointBlank 07-15-2009 12:18 PM

Love the rims and swap, not feeling the lights all around.

Was that first one an old pic and your back to stock, or are the other ones older pics?

Clean_4th gen 07-15-2009 12:25 PM

http://carphotos.cardomain.com/ride_...0031_large.jpg

http://carphotos.cardomain.com/ride_...0031_large.jpg

Clean! :tu: What size are those wheels? :eyebrow:

19TcappaLX 07-15-2009 08:38 PM

WOW!! bro your cb is nice,love that color.those rims are nice also.got some interior pics.

91f22jon 07-15-2009 09:03 PM

Clean ass motor looks good

Raf99 07-19-2009 11:26 AM

Quote:

Originally Posted by Clean_4th gen (Post 2132580)
http://carphotos.cardomain.com/ride_...0031_large.jpg


Clean! :tu: What size are those wheels? :eyebrow:

They are 17".

kouzie 07-19-2009 08:09 PM

that is one clean mofo......:tu::tu:

vietkid_2006 07-19-2009 10:33 PM

pretty agressive. but clean! Cb :p

trubluryder 07-20-2009 01:54 AM

Damn, that is one clean ass paint. Did you get it resprayed? If not, you took damn good care of it :tu:. Btw Most peeps on here may not like your wheels and or the projectors, but I think they suite your car well. Keep it different yet clean :thumbsup:

Ps. If you want your projectors to put out better output, throw some HID'S in and aim them right. Now if you want even better output, throw some HID's into the fogs also :D:tu:

F20A CB7 07-20-2009 08:02 AM

Clean.

jimmybean21 07-20-2009 03:55 PM

clean cb not really feeling the tail lights, but overall it looks good. is your motor stock or have you done some work to it?

Raf99 07-21-2009 07:03 AM

Quote:

Originally Posted by jimmybean21 (Post 2138782)
clean cb not really feeling the tail lights, but overall it looks good. is your motor stock or have you done some work to it?

Motor is a h22a swap. (see above pic)

F20A CB7 07-21-2009 07:54 AM

http://www.cb7tuner.com/vbb/showpost...3&postcount=33

A cool diy for 1 piece ebay lights.

Raf99 07-22-2009 10:51 AM

Quote:

Originally Posted by F20A CB7 (Post 2139712)
http://www.cb7tuner.com/vbb/showpost...3&postcount=33

A cool diy for 1 piece ebay lights.

Thanks, but my headlights are already blacked out. ( can't wait to do the tail-lights though )

Raf99 07-31-2009 10:15 PM

http://memimage.cardomain.com/ride_i...0078_large.jpg

19TcappaLX 07-31-2009 10:32 PM

man your grill is HOT,i want to do my grill like that when i get her painted.

91ExSedan 08-01-2009 06:10 AM

Swweeeet grill.

Clean_4th gen 08-01-2009 11:25 AM

Quote:

Originally Posted by Raf99 (Post 2137480)
They are 17".

Nice, were they hard to find? :eyebrow:

http://memimage.cardomain.com/ride_i...0075_large.jpg

I like your front end! :tu: Do I spy a 90-91 grille on there? :bouncy:

Raf99 08-10-2009 07:58 AM

Quote:

Originally Posted by Clean_4th gen (Post 2153574)
Nice, were they hard to find? :eyebrow:

http://memimage.cardomain.com/ride_i...0075_large.jpg

I like your front end! :tu: Do I spy a 90-91 grille on there? :bouncy:


thanks :thumbsup: You are correct :) ( I gotta adjust that one headlight though, it looks a tiny bit off )

Raf99 08-10-2009 08:01 AM

Quote:

Originally Posted by 19TcappaLX (Post 2152962)
man your grill is HOT,i want to do my grill like that when i get her painted.

Thanks! Here's the DIY I did for it, enjoy :)
http://www.cb7tuner.com/vbb/showthread.php?t=139188


All times are GMT -5. The time now is 05:42 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.