CB7Tuner Forums

CB7Tuner Forums (http://www.cb7tuner.com/vbb/index.php)
-   Naturally Aspirated (http://www.cb7tuner.com/vbb/forumdisplay.php?f=61)
-   -   Mild F22 Build P2V Clearance / Camshaft Regrind Help (http://www.cb7tuner.com/vbb/showthread.php?t=211663)

tgdrums1990 09-09-2019 07:22 AM

Mild F22 Build P2V Clearance / Camshaft Regrind Help
 
In process of a mild f22 extreme budget build.

A6 / H22 Hybrid Intake Manifold
F22A1 Head with .030 milled off the head.
Stock F22A1 block ( Not Touching the bottom )
And I just shipped my camshaft to delta. I have not decided the regrind yet.

A member on here shared these specs sometime ago.

Bisimoto level 2
intake opens ATDC: 4deg
intake closes ABDC: 44deg
exhaust opens BBDC: 41deg
exhaust closes ATDC: 1deg
intake duration: 220deg
intake centerline: 114deg
exhaust duration: 222deg
exhaust centerline: 110deg
overlap -3deg
measure valve lift in/ex: .405"/.392"

My custom web
intake opens ATDC: 2deg
intake closes ABDC: 46deg
exhaust opens BBDC: 44deg
exhaust closes ATDC: 4deg
intake duration: 224deg
intake centerline: 114deg
exhaust duration: 228deg
exhaust centerline: 110deg
overlap: 2deg
measure valve lift in/ex: .430"/.417"


Curious if the Custom Web specs provided would be too much lift with .030 off the head and stock pistons.

Also im on the hunt for a adjustable cam gear for all of this mess I created for myself. Gusse they stopped making them a while ago :(

Thanks again.


All times are GMT -5. The time now is 06:26 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.