CB7Tuner Forums

CB7Tuner Forums (http://www.cb7tuner.com/vbb/index.php)
-   Members' Rides (http://www.cb7tuner.com/vbb/forumdisplay.php?f=42)
-   -   Raf99 : 1993 Accord EX (http://www.cb7tuner.com/vbb/showthread.php?t=139375)

af_1132 08-01-2014 02:57 AM

Quote:

Originally Posted by Raf99 (Post 3206998)
Well, send the S300 back to California, the supplier tested it and it passed all tests. Not sure who's lying now.. :confused: :( :shrug:

Dude, what the heck??? That is so frustrating! :angry: Tell Hondata everything that transpired regarding this problem and see what they have to say.

Raf99 08-01-2014 08:18 PM

Quote:

Originally Posted by af_1132 (Post 3207028)
Dude, what the heck??? That is so frustrating! :angry: Tell Hondata everything that transpired regarding this problem and see what they have to say.

The tuner I deal with is a hondata dealer. And so is the place I ordered the S300. So one of them are lying. My tuner tried several other S300's and had no issues. So I'm leaning towards HAMotorsports knowing the ECU was bad but not admitting it. But I don't think that either because they are giving me a whole new ECU, no charge, even though mine was out of warranty and the tuner opened it up.

tough call i know. So I gave my tuner HAMotorsports email and they have been battling it out at each other now. I basically went to my tuner and told him to sort it out and that I didn't want to be the middle man. I just want my car to work...


ECU (with new internals) is being shipped back to me tomorrow...

af_1132 08-04-2014 07:43 PM

Quote:

Originally Posted by Raf99 (Post 3206526)
The Zonda R was always my favorite car. But I also had no idea about this, I can't imagine what these folks will come up with next....

And now, Hennesey is coming out with this: the F5

https://autos.yahoo.com/blogs/motora...143908780.html

Restless 08-04-2014 08:22 PM

Quote:

Originally Posted by Raf99 (Post 3207065)
The tuner I deal with is a hondata dealer. And so is the place I ordered the S300. So one of them are lying. My tuner tried several other S300's and had no issues. So I'm leaning towards HAMotorsports knowing the ECU was bad but not admitting it. But I don't think that either because they are giving me a whole new ECU, no charge, even though mine was out of warranty and the tuner opened it up.

tough call i know. So I gave my tuner HAMotorsports email and they have been battling it out at each other now. I basically went to my tuner and told him to sort it out and that I didn't want to be the middle man. I just want my car to work...


ECU (with new internals) is being shipped back to me tomorrow...

I hope everything works out man. I'm currently about to tune my car soon with the S300 V2 in a P28 installed by swapshopracing, but my AC won't turn on with the Hondata ECU however for my chipped P28 it works perfectly fine. Fingers crossed it's not the ECU because I purchased it like 2-3 years ago or else I'll be in the same boat as you.

Stoner51 08-04-2014 08:33 PM

Man. That is really a bummer. When I purchased my s300 I sent my chipped p06 to pherable and they installed it. Knock on wood I've had no problems.

Have you actually looked at the ECU or are you not bothering and letting them handle it. I would think that anybody that sells ecu's would surely know how to solder. Maybe you just have a bad cap. That should be a fairly easy fix.

I just picked up 2 more backup ecu's over the weekend. Another p06 I plan to chip and a p28. I have been looking for a p72 but have given up.

Restless there is a setting in the s300 software to disable the ac at a certain rpm. I'm sure you check but if not you might want to .


steve

Restless 08-05-2014 12:12 PM

Quote:

Originally Posted by Stoner51 (Post 3207352)

Restless there is a setting in the s300 software to disable the ac at a certain rpm. I'm sure you check but if not you might want to .


steve

Appreciate the advice Stoner51:tu:, but yeah I've tried that already when I uploaded my basemap from phearable. One day it will be fixed lol.

DanCan 08-05-2014 03:45 PM

Looks pretty damn clean for a Canadian CB. Keep up the good work, looks like you take good care of her.

Raf99 08-06-2014 11:28 PM

Quote:

Originally Posted by DanCan (Post 3207422)
Looks pretty damn clean for a Canadian CB. Keep up the good work, looks like you take good care of her.

Thanks man. I've been to your page many times :)

Raf99 08-19-2014 08:00 PM

http://i861.photobucket.com/albums/a...819_180224.jpg

http://i861.photobucket.com/albums/a...819_175734.jpg

http://i861.photobucket.com/albums/a...819_173601.jpg


Low end boost tuning. About 7psi here. We will be going up around 17psi but the exact amount yet to be determined :bouncy:

af_1132 08-19-2014 09:10 PM

Yes! It is happening! Can you post up a video of the pulls? You got your ECU back with new internals, right?

Raf99 08-19-2014 10:05 PM

haha. you guys rock. ECU is back, all is well! We did some low boost / low cam pulls. We were at 201/163 at 7psi around 6000rpm. Tomorrow is high cam profile engage with high boost, hoping to get 350-400hp with 14-17psi :)

Video doesn't do this justice. The car sounds amazing! 3" exhaust all the way back with a magnaflow muffler.

I'll try to get more videos tomorrow!

ol blue 08-19-2014 10:15 PM

This thing sounds nuts. Glad to see it finally running.

Restless 08-19-2014 11:37 PM

Glad to see your car on the dyno. By the way the your engine bay is looking clean:thumbsup:.

XCRN 08-20-2014 12:18 AM

And still some summer to enjoy it!

Raf99 08-20-2014 06:06 AM

Quote:

Originally Posted by XCRN (Post 3208862)
And still some summer to enjoy it!

Barely! :tu:

dahubby 08-20-2014 09:17 AM

Sounds like its on the runway, ready to take off.... Im happy for you man. I know its been a struggle but the final result is awesome...

Lucien 08-20-2014 05:26 PM

:tu:

WAAAAAAAAAAAAAAA

PSSSSSSSHHH

WAAAAAAAAAAA

PSSSSSSHH

Raf99 08-20-2014 09:03 PM

asdfa;sdifjlasdfoha pdfhadf ha;dsofh 'AW[FIJwefsdfaodsf

wow...... ....... ........ ............... ............... .............. ........ ....... .................... ....ahhhhhhhh wow...

So I took the car for a drive today for the first time today. We are half way through the tune and these are the results at 9psi at 7500rpm. We still have to tune up to 17psi which will should be around 400hp.
Words cannot explain the high. The happiness this brings to one :) I have never been able to spin the tires in 3rd and 4th gear before. It's........ amazing! The car has so much power it is scary, but a good scary.

Still trying to get some videos though. :)

Andrewasoar 08-21-2014 12:15 AM

I'm so excited for you man! It's great to see that it's all coming together for you. :bouncy:

af_1132 08-21-2014 02:05 AM

By far, this is Canada's craziest CB!

It would be epic, ABSOLUTELY EPIC, to see 2point6, you, NWAccord, and BoostLee take a pass together down the Zmax Drag Way after you get tuned to the full 17 psi.


All times are GMT -5. The time now is 10:41 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.