Headlights need adjusted.

[HONDUHCB7GIRL91]

Ok so, my right headlight shines farther than my left. The left one is kinda off to the side more. Someone told me i need to adjust the bulbs? and idk how to do that..

[CB7_91/DX]

What type of headlights do you have OEM or 1pc projectors?

Its not the bulb you adjust, its the housing. If its OEM headlight it might be that its not sitting right in the bracket or you might have a bent rad support OR if its 1pc projectors they can be adjust from the back it has 3 screws which holds the projector. Hope this helps

[TypeG]

there is a large phillips head screw on the upper side of the headlight. it is for vertical adjustment.

there's another geared adjuster on the lower right hand corner of the backside of the headlight. it is for adjustment horizontally.

aim your headlights (on level ground) at a wall. some people eyeball it, some use tape. also the distance at which the car sits from the wall is debatable. anywhere for 4-25 feet. later.

[MikeW]

Ive heard 25 feet.

And arent there 4 screws??

Up/down for the lows
Left/right for the lows
Up/down for the highs
Left/right for the highs

[TypeG]

no, there are only 2 per headlight.

here:


and here:

later.

[MikeW]

Im a crackhead then.

[CB7_91/DX]

no, there are only 2 per headlight.

here:


and here:

later.

Forgot to mention those.

[Accord93RR]

Its ok if they shine in a messed up direction, at least they shine!!!!

[HONDUHCB7GIRL91]

Thanks ill have to look at that tommorrow i have oem headlights.

[darkfusion42]

little late, but figured I should mention that the drivers side is SUPPOSED to shine shorter than the passenger. I'll try to find the image from above of how the beam pattern should be. It's like the drivers side is projected about 10' shorter than the passenger, which also projects farther and sligtly higher as to light streetsigns.