but you should leave these like that
-
Click for my Member's Ride Thread
UPDATED NEW PICS!!! -
-
yes do SO its such a easy process whole thing took about a hour.
when u get the GLUE warm or softend, ill take it all out next time, i left the old glue and had a lil hard time puttin it back cuz it got a lil hard.
**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICEComment
-
Should have left the reflector in there.CB7
Removed:A/C, P/S, C/C, ABS, Wires, Battery
Added: H22A, South Bend TZ Series Clutch, Fidanza (8lb) Flywheel, Megan 4-1 Headers
Waiting For:M2F4 Tranny
, NX 50 ShotComment
-
dont need it, u can SEE my lights in the DAY**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICEComment
-
i got the same idea from TypeG. just need to get some clear/red's and some paint. i'm leaving the reflector in though. looks good. finish up the others and post up pictures.Comment
-
**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICEComment
-
that look good....good jobComment
-
looks gewd man
I-SR 6Comment
-
How did you heat the glue so it can pry off?
I saw TypeG's thread and tried this myself. But my hairdryer just wasn't cutting it, so I used the oven at 210 degrees (F) for about 10 mins per light.
On the first light I had a hard time prying it open because the "snap tabs" (that allow the lense to snap into place) were holding it in.)
On the second light I pre-dremelled the "snap tabs" off before putting it in the oven. When I went to take the lense off, it came off nice and easy.
On the third light I thought I had a perfect system going on, and yeah, this time it was perfect too.
On the fourth light I got distracted while I was waiting for the glue to heat up (I was watching monster jam). I left it in too long (about 17 mins). When I went to pull the lense off, the lense had become plyable, and I warped it as I pulled it off the housing. I was unable to warp it back to normal.
Luckily I did this all on a spare set of lights I got free, in case I screwed up I didn't want to mess up my orignal lights still on my car.
Since I only have one light to redo, I'm gonna go ahead and pull it off my car and finish the set. Hopefully I don't screw up that one, cuz I'm out of lights to play with.Comment
-
i like mine and happy with themComment
-
nice nice AZUL i like that style, very diff**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICEComment
-
very nice...
Comment
-
No im saying it because I dont like the crystal clear look, but what ever suits you.Originally posted by F20A CB7CB7
Removed:A/C, P/S, C/C, ABS, Wires, Battery
Added: H22A, South Bend TZ Series Clutch, Fidanza (8lb) Flywheel, Megan 4-1 Headers
Waiting For:M2F4 Tranny, NX 50 ShotComment
-
i would like to see what the oem 9293 tails look like but with the reflector before i do mines.Comment
Comment