nice write up. turned out great
Announcement
Collapse
No announcement yet.
EXT: Complete Amber corners w/ Reflectors 92-93 accord
Collapse
X
-
-1992 Accord EX H22 234whp 185wtq
-1993 Accord EX SOLD
-1995 Accord EX Wagon Daily Driver
-2012 GMC Canyon V8 4x4
-
Originally posted by EJX_Michael View PostHow did you get them back together? just the melted sillicone?
Originally posted by ikayto View Postgood idea, i should do these to my stock set since they're all yellowed out from my failed diy ambering lol.
i wonder how these would work with jdm coupe corners.
but the concept should be the same
Comment
-
Originally posted by The-Gr8-Ox View Postthere is really no silicone glue that holds them on, its more like a super glue, the heat in the oven allows it to pop off easier, when you put it back on, i used loctite stick&seal waterproof glue, takes a bit to cure, but i have yet to have it fog the inside since we've had all this rain and fog.
Thanks.
Comment
-
Originally posted by GearBangnAccord View Postwill the 92 reflector fit in the 91 housing cuz the 91's ahve the reflectors in the lense not the housing??
Comment
-
Nice write up. I did this about 5 years ago but i used this stuff called Ambroid plastic weld to glue them back together. I don't think they make Ambroid anymore but this stuff called Tenax 7R is the same.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHU34
Comment
-
Originally posted by DRzCB72nr View Postgot mine today,
i used the whole amazon light, so i just added the reflector.
for those of you who dont know its only one screw that holds it.
Final product.
ill have pictures of them on the car tomorrow.
-Ox
Comment
-
These off of Amazon have the reflectors in them. http://www.amazon.com/1992-92-93-ACC...1297439&sr=1-1 Or at least n the photo they have the reflectors in them.
86 4Runner - 22RE 5spd, 4" Lift, 35x12.5R15 BFG Km2's, 4.10 gears
"The Turtle"
DD/Trail Rig/Mud Bug
Comment
Comment