Announcement

Collapse
No announcement yet.

EXT: OEM Fog Light installation (USDM 9293, others similar)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Re: THE 92-93 oem template

    Originally posted by Prez808
    Well I decided to not join the two images of the scanned template together, because they are too long to fit on a 8.5x11 piece of paper. So, here are the two separate scans that I made of my template. I marked a line across the template so that the two pieces could be rejoined later.


    Enjoy!

    http://s7.yousendit.com/d.aspx?id=5B...54E2BB4AEFB577

    http://s7.yousendit.com/d.aspx?id=1F...3BF8C00D7F331B
    i would like this template. but, the page has expired due to 7 days time/ 25 downloads. obviously it has been seven days since this post. i just want a copy of the template. thanks in advance.

    178 whp and 148 torque (mustang dyno)
    14.8 @ 93 in 1/4 mile-in Accord
    ??.? @ ?? in 1/4 mile-in Civic

    Comment


      #32
      part 1

      Part 2

      Comment


        #33
        My only thing that I see is that what do the screws actually tap into. I haven't had time lately to install them but hopefully this weekend or next (holidays are kicking my ass right now).
        No more cb7, 7 years of ownership and 196K on the ticker before she was sold

        Current beast: 98 ej8 on 7psi with a 15g turbo and other goodies!

        NREMT-B | 300D and some glass

        Comment


          #34
          look VERY VERY close... hopefully youll see a VERY faint double dotted outline...


          - 1993 Accord LX - White sedan (sold)
          - 1993 Accord EX - White sedan (wrecked)
          - 1991 Accord EX - White sedan (sold)
          - 1990 Accord EX - Grey sedan (sold)
          - 1993 Accord EX - White sedan (sold)
          - 1992 Accord EX - White coupe (sold)
          - 1993 Accord EX - Grey coupe (stolen)
          - 1993 Accord SE - Gold coupe (sold)
          Current cars:
          - 2005 Subaru Legacy GT Wagon - Daily driver
          - 2004 Chevrolet Express AWD - Camper conversion

          Comment


            #35
            No I understand the outline part but where do the screw tap in at; like in the bumper. I noticed in the template the circle parts those I am assuming are where the screws are going
            No more cb7, 7 years of ownership and 196K on the ticker before she was sold

            Current beast: 98 ej8 on 7psi with a 15g turbo and other goodies!

            NREMT-B | 300D and some glass

            Comment


              #36
              look at timmyOtool's picture.. there's 4 little holes that you can put screws into. The lights are on brackets, then the brackets line up to those holes..

              Comment


                #37
                Originally posted by cpmike
                [img]http://****.creed-fanatic.com/maurifogs/step4.jpg[/img]
                did those liners come with the kit?

                btw, the install looks stellar mike!

                Comment


                  #38
                  man i want fogs.
                  The liners are a oem part

                  My ride RS6 HELLA Bi-xenon ECE retrofitted CB7
                  www.maketradefair.com

                  Comment


                    #39
                    yeah the liners came with mauri's kit, they are an oem part like 97lude said. for the foglight install you need the fogs, the brackets with the screwholes, the rubber liners, the wiring harness, and the button.


                    - 1993 Accord LX - White sedan (sold)
                    - 1993 Accord EX - White sedan (wrecked)
                    - 1991 Accord EX - White sedan (sold)
                    - 1990 Accord EX - Grey sedan (sold)
                    - 1993 Accord EX - White sedan (sold)
                    - 1992 Accord EX - White coupe (sold)
                    - 1993 Accord EX - Grey coupe (stolen)
                    - 1993 Accord SE - Gold coupe (sold)
                    Current cars:
                    - 2005 Subaru Legacy GT Wagon - Daily driver
                    - 2004 Chevrolet Express AWD - Camper conversion

                    Comment


                      #40
                      i heard that 93accordEX installed his fogs w/o the liners, is that true?

                      if so, he must have done some precise cutting!

                      Comment


                        #41
                        yea i bought my stuff back in april for 200 bux shipped. it was the fogs, brackets, rubber seals, fog button, and screws and stuff.

                        mike is good. did the install mostly cuz i wasnt to sure i could cut the bumper right. but now i could do it without a problem just give me the right tools.

                        the wiring harness i didnt have and didnt care if i had it. i went to advance auto parts and got an apc fog light wiring kit. i got it for free from a friend that works there. mike did the wiring to the button it took like 5 min to figure out what is what

                        i can drive with my highbeams on with the fogs which is HOT imo. factory wiring harness u cant have the fogs on with the highbeams.

                        for jason's car 93accordex his install was sloppy. no offense jason. but yea the cuts were all jagged and didnt look like it was sanded. as in mine u can see that we sanded the edges so its not jagged. but yea the rubber seals are a most for me just cuz it looks cleaner and an oem install.

                        if u guys want more pics of the fogs i can take them just ask!

                        mauricio

                        Comment


                          #42
                          heh... im gonna be going down to help 97lude with his, and he doesnt have liners... this is gonna be hard, hopefully itll come out nice and clean. we will see...


                          - 1993 Accord LX - White sedan (sold)
                          - 1993 Accord EX - White sedan (wrecked)
                          - 1991 Accord EX - White sedan (sold)
                          - 1990 Accord EX - Grey sedan (sold)
                          - 1993 Accord EX - White sedan (sold)
                          - 1992 Accord EX - White coupe (sold)
                          - 1993 Accord EX - Grey coupe (stolen)
                          - 1993 Accord SE - Gold coupe (sold)
                          Current cars:
                          - 2005 Subaru Legacy GT Wagon - Daily driver
                          - 2004 Chevrolet Express AWD - Camper conversion

                          Comment


                            #43
                            man i need those rubber brackets

                            My ride RS6 HELLA Bi-xenon ECE retrofitted CB7
                            www.maketradefair.com

                            Comment


                              #44
                              its hard to find shit i know that. but u have to improvise. go to home depot or a rag shop look for rubber sealing and make ur own just so it looks better. would u rather see ur raggedy cuts or home depot rubber that kinda looks like its oem

                              and with that u can relax. and look for them with better patience.

                              if mikes doing it u will be fine shit maybe we can do a photoshot like i would go and watch and help if its neccessary just make a mini meet but to install shit. like me and mike when are we doing are oil catch cans lol

                              mauricio

                              Comment


                                #45
                                ha you should come down. its going down tuesday.
                                im excited. fogs finally. this is huge

                                My ride RS6 HELLA Bi-xenon ECE retrofitted CB7
                                www.maketradefair.com

                                Comment

                                Working...
                                X