View Single Post
Old 05-27-2018, 01:41 AM   #3
zedjr10
Gold Member
 
Join Date: Jan 2017
Location: Denver, Colorado
Posts: 639
zedjr10 may have said something they shouldn't have...
Quote:
Originally Posted by fleetw00d View Post
I suspect your old ones have taken a compression set (they didn't rebound to as thick as they were originally) because of age. Will either set actually go on the rod over the sleeve and in the pockets in the cross member? If you can install them and the nut tightens the washers down onto the sleeve, I would go ahead and use them.
Strut rod(radius rod) won't go over the holes in lower control arm. Yeah i thought same thing but there is no way to bring it forward so they will go in. About 2 or 3 mm to far away. As i got 2 that are same exact size from different manufacturers.
zedjr10 is offline   Reply With Quote