View Single Post
Old 09-18-2019, 11:45 AM   #1
Join Date: Nov 2013
Location: Vancouver, WA
Posts: 18
K2theM is cool... so far.
Installing Keyless - Missing some wires

I have a 1990 EX that I just installed an aftermarket Keyless entry system in. Through other threads on this forum I found various guides and wiring conversions that were really helpful. I was able to successfully install the module and have fully functioning remote Lock/Unlock + Parking Light Flash (Kinda wish it was Hazard flash instead of Parking... but it works).

However, I'm missing on a couple things that I would like to have:
  1. Where is the Horn wire? It's supposed to be a Light Green/Blue wire in the steering column harness. However I was not able to find it. Maybe I was looking in the wrong spot?
  2. I have power windows, and the module has an Auto Window Up function. How do I properly hook this up? I've read some places that say I'll need a separate module to control this, and others that say to just run four wires from the window control board to the module. Which is correct?

The module also has trunk pop functionality, but I know I'll need to rig up a separate solenoid or swap out the catch unit to make this work. I'll tackle that another time.
K2theM is offline   Reply With Quote