Announcement

Collapse
1 of 2 < >

ANY BUYING/SELLING IN THIS FORUM WILL RESULT IN AN INSTANT BAN!

Read the rules: http://www.cb7tuner.com/vbb/showthread.php?t=43956

Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
2 of 2 < >

Beginner Forum Rules - EVERYBODY read! (old and new members alike!)

Beginners start here. Once you have 30 worthwhile posts (off topic doesn't count) you may post outside of the Beginner forums. Any "whoring" (posting simply to raise your post count) will return your count to 0, or result in a ban.

These are the rules. Read them. Live by them.

1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.

2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.

3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.

4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.

The rules can and will be added to. Any updates will be marked in the title.

The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
See more
See less

axle issues H22a Accord SiR t2w4

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    axle issues H22a Accord SiR t2w4

    Got an issue, klunky feeling doing left turns, like it binds up after my H22A swap.

    Factory setup was the f22a1 lx coupe A/T 92.

    Now running JDM H22A from 94 Accord SiR mated to a t2w4 LSD M/T.

    I could put the 92 accord pass. side axle from the A/T on there in place of the M/T 94 accord axle.

    Does anyone know of a solution to this dilemma?

    I have been scouring axle/H swap threads/google and cannot seem to find anything for this JDM 94 Accord H22A SiR application.
    Last edited by djALBINI; 10-19-2018, 01:35 AM.

    #2
    I'm assuming you've used the prelude intermediate shaft, everything needs to be accord to work. I went through the same issues and there is a difference.

    EDITED AS PER NEW THREAD:

    94-97 accord axles are longer, use the original Auto Axle instead, itll work
    Last edited by lbus9168; 10-19-2018, 01:52 AM.
    sold! But here's my build thread for those interested.

    http://www.cb7tuner.com/vbb/showthread.php?t=206864

    Comment


      #3
      Yep. I used my factory RH side auto axle, And a Manual LH side axle and intermediate shaft from a CB3 I'm fairly sure it was. All works fine though

      Comment


        #4
        well, ive got the new cardone axles in place that are made to fit my 92 lx MT, unfortunately the jack shaft that connects the left one to the trans is still the same that came with the JDM 94 accord SiR motor.

        I guess we will find out if this setup works.. if not im driving an hour to get the right one asap

        Comment


          #5
          If the halfshaft has a female end for the driver's side axle, it shod be the correct one, either way.
          My Members' Ride Thread - It's a marathon build, not a sprint. But keep me honest on the update frequency!

          Comment


            #6
            The JDM Accord SiR half shaft did not work because it has different inputs and would not accept the cb axle. Thanks to a buddy, I had another one that did. Hope this helps someone in the future.

            Comment

            Working...
            X