Good on the injectors. I was going to suggest that a couple days ago but my reply got lost in the 3g network lol.
I’ve used injector cleaning machines and basically you might be able to get them unstuck by force opening them. Use a ground test light or power probe, start the car and jump the ground of the injector. This will force it open allowing a lot of fuel to wash through it because it’s 100% duty cycle. Don’t hold it open for more than half a second or so. And you can do rapid on off on off to try to shake the injector insides. I’ve had success with this at 18V for really stuck injectors but regular 12v is fine.
Tcw-3 oil is also an amazing injector cleaner when coupled with 90% rubbing alcohol. That’s what we used in the machine.
I’ve used injector cleaning machines and basically you might be able to get them unstuck by force opening them. Use a ground test light or power probe, start the car and jump the ground of the injector. This will force it open allowing a lot of fuel to wash through it because it’s 100% duty cycle. Don’t hold it open for more than half a second or so. And you can do rapid on off on off to try to shake the injector insides. I’ve had success with this at 18V for really stuck injectors but regular 12v is fine.
Tcw-3 oil is also an amazing injector cleaner when coupled with 90% rubbing alcohol. That’s what we used in the machine.
Comment