Bisimoto F22ax header group buy in special! - Page 36

jhondayaaj · 07-28-2010, 03:05 PM

Nothin man. Haven't done the oil change yet. Lol. Too lazy. Maybe this Saturday

randull · 07-28-2010, 08:07 PM

Hey everyone!

Just a heads up, we are expecting piping in between August 16th and 20th. So once we get it in we are going to deliver it to final fabricator. With that in mind, start saving that cash up for the final payment!

With that in mind it will be done before you know it!

Cheers!
-Randy

samrjr0044 · 07-29-2010, 12:58 AM

Quote:

Originally Posted by kentucky accord

te fact that these units arent being made 'in house' is just going to further delay the delivery date.

like ive said a thousand times before, i wish you guys the best but this experience has left a bad taste in my mouth for any 'group buys' in my future and im not even involved w/ this one.

good luck guys. i expect some sweet results over the next few months...err...uhhh...years.

Can you please stop posting in this thread. You have no business here. You are only adding posts that do not need to be here. I'm fed up with your negativity. Thanks.

END RANT

Quote:

Originally Posted by randull

Hey everyone!

Just a heads up, we are expecting piping in between August 16th and 20th. So once we get it in we are going to deliver it to final fabricator. With that in mind, start saving that cash up for the final payment!

With that in mind it will be done before you know it!

Cheers!
-Randy

Thanks Randy for the update. I do not mind being the last one to have the header made for. I have the patience, and project time frame to wait for it. I am currently working on some projects for the car. By the way i need to get into contact with you about some parts i need to order. Thanks again randy.

randull · 07-29-2010, 01:23 PM

samrjr0044

No prob mang! Shoot me an email today though, I am not in the shop...

...Im stuck at jury duty! ...STEALING WIFI so I can keep you guys informed lol,

but yeah shoot me an email and I will get you taken care of, if anyone else has any questions concerns or thoughts shoot me an email: Randy@Bisimoto.com

Cheers guys!
-Randy

randull · 07-30-2010, 01:16 PM

Guys...

Lets all keep it civil here, no need to argue and bicker, we are all here to achieve excellence in our vehicles!

With that being said, its Friday guys its about to be the First of August....

Materials should be here in roughly two weeks! Start saving those pennies!

Ghetto_CB7 · 07-30-2010, 01:52 PM

Quote:

Originally Posted by randull

Guys...

Lets all keep it civil here, no need to argue and bicker, we are all here to achieve excellence in our vehicles!

With that being said, its Friday guys its about to be the First of August....

Materials should be here in roughly two weeks! Start saving those pennies!

Randull, I believe that we have had more updates from you in the last week then we got from the other reps over multiple months. It is good to see a more active presence on the forums, i think all of us have seen that as a weakness in the bisimoto bull pin. Hopefully you are here to fill that gap.

Since the main complaint has been the time it has taken to complete the headers, everyone understands the frustrations here, but as randull mentioned if someone wants their header now, all they have to do is pay full price.

This entire thing is a learning process, and now we have all learned what to expect from custom one off group buys. With this said, hopefully bisi and his staff learn from this and can provide either a more accurate timeline, or a shorter turn around time.

Anyway I guess we will see what happens in a few weeks and hopefully see some good news.

GhostAccord · 07-31-2010, 11:10 AM

There have been worse lessons learned from other group buys. At least there is a light at the end of the tunnel on this one!

cloudasc · 08-01-2010, 12:34 AM

Like another member already mentioned.....

Good, Cheap, Fast... pick any two.

If its good and cheap, your not going to get it fast.

If its cheap, and you want it fast, its probably not good.

If its good and and you want it fast, its not going to be cheap.

randull · 08-03-2010, 05:05 PM

Hehehe,

Im trying to keep you guys posted! Bear with me, I messed up my back last week and my weekend/start of the week has been horrible, so Im playing a bit of catch and might not be posting as much, but I got my eyes on the forums!

Start saving those pennies, nickels, and dimes though, your headers will be done before you know it!

randull · 08-05-2010, 01:50 PM

if you guys have not gotten your header spec sheets in, do it asap! ETA 11 days and counting until we get the materials!

Also, if anyone wants there header ceramic coated, let us know ASAP!

randull · 08-09-2010, 04:21 PM

I have been told that we are looking at recieving materials this week!

So get that money saved up, if you want a ceramic coating let me know asap!

frootloops · 08-09-2010, 05:45 PM

Quote:

Originally Posted by randull

I have been told that we are looking at recieving materials this week!

So get that money saved up, if you want a ceramic coating let me know asap!

I assume those of us who have already said we want the ceramic coating don't need to let you know... right?

Money is saved up and ready to be spent, can't wait!

Tnwagn · 08-09-2010, 07:02 PM

Materials this week!!!

Is this real life?

tishock · 08-09-2010, 07:27 PM

Given that this group buy project has been handed over a few times among Bisi employees. Should we assume our spec sheets and Jet Hot Coating requests, that were sent months ago are accurate? Or would it be prudent to resend it again just to make sure of our order's accuracy?

randull · 08-13-2010, 12:18 PM

As long as they were sent and filed you are fine, if you are curious you can call the shop and we will confirm for you!

If you want to add it now is the time!

randull · 08-16-2010, 06:41 PM

If you guys are worried about whether or not your particular spec sheet or order was properly place just send me an email with it and I will cross reference it!

Cheers guys!
-randy

102030405 · 08-17-2010, 12:26 PM

Quote:

Originally Posted by randull

If you guys are worried about whether or not your particular spec sheet or order was properly place just send me an email with it and I will cross reference it!

Cheers guys!
-randy

for those that don't know his email

Randy@Bisimoto.com

kentucky accord · 09-03-2010, 03:50 PM

just bumping this thread that started over a year ago...

any updates? materials make it in as suggested a few posts back?

F22Cb7Rid3r · 09-03-2010, 04:42 PM

curious for update?

bruno8747 · 09-03-2010, 04:54 PM

Quote:

Originally Posted by F22Cb7Rid3r

curious for update?

Yea hes curious, whats the big deal?

So am I. I've been waiting to see what everyone power numbers are gonna be after they have it installed. After waiting close to a year a few more months wont matter anyway.

07-28-2010, 03:05 PM	#701
jhondayaaj CB7tuner Member Join Date: Mar 2005 Location: so cal Posts: 5,420	Nothin man. Haven't done the oil change yet. Lol. Too lazy. Maybe this Saturday __________________ The beginning of a new era............................ 165 hp 149 ft. lb. torque sohc non vtec.

07-31-2010, 11:10 AM	#707
GhostAccord CB7tuner Member Join Date: May 2007 Location: East Coast 506 Canada Posts: 632	There have been worse lessons learned from other group buys. At least there is a light at the end of the tunnel on this one! __________________ Help A Fellow Accord Enthusiast Out! Visit my Blog and check out the ads.

08-09-2010, 07:27 PM	#714
tishock CB7tuner Member Join Date: Sep 2007 Location: Los Angeles Posts: 84	Given that this group buy project has been handed over a few times among Bisi employees. Should we assume our spec sheets and Jet Hot Coating requests, that were sent months ago are accurate? Or would it be prudent to resend it again just to make sure of our order's accuracy? __________________

09-03-2010, 03:50 PM	#718
kentucky accord CB7tuner Member Join Date: Aug 2003 Location: kentucky fried Posts: 114	just bumping this thread that started over a year ago... any updates? materials make it in as suggested a few posts back? __________________ '91ex coupe, modified. http://www.youtube.com/watch?v=sP0JsF__KzA

09-03-2010, 04:42 PM	#719
F22Cb7Rid3r CB7tuner Member Join Date: Jan 2008 Location: the 360, WA Posts: 1,174	curious for update? __________________ MY RIDE THREAD 92 Arcadia Coupe

07-28-2010, 08:07 PM	#702
randull Bisimoto Representative Join Date: Jun 2010 Posts: 54	Hey everyone! Just a heads up, we are expecting piping in between August 16th and 20th. So once we get it in we are going to deliver it to final fabricator. With that in mind, start saving that cash up for the final payment! With that in mind it will be done before you know it! Cheers! -Randy

07-29-2010, 01:23 PM	#704
randull Bisimoto Representative Join Date: Jun 2010 Posts: 54	samrjr0044 No prob mang! Shoot me an email today though, I am not in the shop... ...Im stuck at jury duty! ...STEALING WIFI so I can keep you guys informed lol, but yeah shoot me an email and I will get you taken care of, if anyone else has any questions concerns or thoughts shoot me an email: Randy@Bisimoto.com Cheers guys! -Randy

07-30-2010, 01:16 PM	#705
randull Bisimoto Representative Join Date: Jun 2010 Posts: 54	Guys... Lets all keep it civil here, no need to argue and bicker, we are all here to achieve excellence in our vehicles! With that being said, its Friday guys its about to be the First of August.... Materials should be here in roughly two weeks! Start saving those pennies!

08-03-2010, 05:05 PM	#709
randull Bisimoto Representative Join Date: Jun 2010 Posts: 54	Hehehe, Im trying to keep you guys posted! Bear with me, I messed up my back last week and my weekend/start of the week has been horrible, so Im playing a bit of catch and might not be posting as much, but I got my eyes on the forums! Start saving those pennies, nickels, and dimes though, your headers will be done before you know it!

08-05-2010, 01:50 PM	#710
randull Bisimoto Representative Join Date: Jun 2010 Posts: 54	if you guys have not gotten your header spec sheets in, do it asap! ETA 11 days and counting until we get the materials! Also, if anyone wants there header ceramic coated, let us know ASAP!

08-09-2010, 04:21 PM	#711
randull Bisimoto Representative Join Date: Jun 2010 Posts: 54	I have been told that we are looking at recieving materials this week! So get that money saved up, if you want a ceramic coating let me know asap!

08-13-2010, 12:18 PM	#715
randull Bisimoto Representative Join Date: Jun 2010 Posts: 54	As long as they were sent and filed you are fine, if you are curious you can call the shop and we will confirm for you! If you want to add it now is the time!

08-16-2010, 06:41 PM	#716
randull Bisimoto Representative Join Date: Jun 2010 Posts: 54	If you guys are worried about whether or not your particular spec sheet or order was properly place just send me an email with it and I will cross reference it! Cheers guys! -randy

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: