CB7Tuner Forums

Go Back   CB7Tuner Forums > Parts & Performance > Audio/Electronics

Reply
 
Thread Tools Rate Thread Display Modes
Old 05-29-2019, 06:56 AM   #1
CB9_IS_2_BETTER
CB7tuner Member
 
Join Date: May 2018
Location: Michigan
Posts: 37
CB9_IS_2_BETTER is cool... so far.
Single Din Setup

Hi everyone, I just got a new Pioneer MVH-S512BS and have it just resting in position right now and am pretty happy with how it looks. So tonight I am going to try to figure out if I can mount it myself or need an aftermarket bracket, and my question is if anyone has figured out something to do under the single din other than that dumb little pocket, like somehow mount a flip out cup holder or something? I just see a lot of the aftermarket brackets have that pocket but its even smaller than OEM and seems totally pointless haha, so if anyone has done anything let me know, I will be playing around with it myself and post some pics pretty soon. Thanks
CB9_IS_2_BETTER is offline   Reply With Quote
Old 05-29-2019, 07:18 AM   #2
Grumpys93
Contributing Member
 
Join Date: Jan 2005
Location: Sunshine State
Posts: 2,863
Grumpys93 seems to have made some friends!
At one point I had my glass break sensor and turbo timer mounted in there. With the shifter right there if you have a manual, doesn’t allow you many options. I thought about creating a usb charger and maybe throwing it in there.
__________________
~Nick~
FSAE (F Series Accord Enthusiasts) ..."A dying breed thats taking it to the next level" Lucky #13
MR Thread:http://www.cb7tuner.com/vbb/showthre...ight=Grumpys93
Grumpys93 is offline   Reply With Quote
Old 05-29-2019, 08:30 AM   #3
CB9_IS_2_BETTER
CB7tuner Member
 
Join Date: May 2018
Location: Michigan
Posts: 37
CB9_IS_2_BETTER is cool... so far.
Yea I know there's not much room there, I was already planning on putting a USB on my armrest in one of the plug cutouts, I really want to figure out a better cupholder solution for our cars or maybe just something cool and fun, doesnt even need to be super functional haha
CB9_IS_2_BETTER is offline   Reply With Quote
Old 05-29-2019, 08:49 AM   #4
cp[mike]
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
 
Join Date: Sep 2003
Location: Denver, CO
Posts: 12,078
cp[mike] is very helpful cp[mike] is very helpful cp[mike] is very helpful
using a Coin/Cup slide-out tray combo from an old Ford Taurus / Mercury Sable was a mod that I've seen done, might want to look into that. It should be cheap to grab one from a junkyard, though I assume it will take some creativity to mount successfully in a CB, and I'm not sure it would be much of an improvement over the stock one Link: https://honda-tech.com/forums/honda-...nsole-2632410/

You can find similar ones on Amazon that are aftermarket and designed to actually mount properly, search for "universal single din cup holder" to see the alternative.



__________________


- 1993 Accord LX - White sedan (sold)
- 1993 Accord EX - White sedan (wrecked)
- 1991 Accord EX - White sedan (sold)
- 1990 Accord EX - Grey sedan (sold)
- 1993 Accord EX - White sedan (sold)
- 1992 Accord EX - White coupe (sold)
- 1993 Accord EX - Grey coupe (stolen)
- 1993 Accord SE - Gold coupe (sold)
Current cars:
- 2005 Subaru Legacy GT Wagon - Daily driver
- 2004 Chevrolet Express AWD - Camper conversion
cp[mike] is offline   Reply With Quote
Old 05-30-2019, 02:51 PM   #5
NH-503P-3
CB7tuner Member
 
Join Date: Aug 2017
Location: Piñon Hillbilly/SoCal
Posts: 166
NH-503P-3 is cool... so far.
I actually like the first gen Acura CL felt pocket with the closing lid. For a single din it looks good. The standard CB cup holder is totally useless. Especially with a manual trans. I swapped mine out for a DX pocket (no cup holder). It’s just a nice deep pocket. I mounted a small single folding cup holder on the passenger side of my shifter console. Works great it’s out of the way and folds flat when the passenger seat needs to slide forward.
__________________
5 studded & leather clad - Praise The Lowered

~Mark~
NH-503P-3 is offline   Reply With Quote
Reply

Tags
audio , head unit , mount

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:51 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.