the mail is here
LOOK bandages came in the mail.
It's true time of delivery... AEM cam gears. To my surprise they are extremely light weight. The gears came locked in to 0 already. They look awesome by the way. Each gears comes with a load of instructions for those people who's engine is still mounted in the car and a AEM decal. I purchased them from a seller called real street on Ebay for $210 shipped. I took this time to install the new cam seals from Honda i previously ordered.
NEXT UP
When i was at Honda day at Atco Raceway in NJ, i was checking out other guys set up and i saw somthing cool that is useful. On the giveaway car which was a acura integra type r. The valve & timing cover was cut out to allow any tuner to adjust the cams with out taking the valve cover off. So i did the same thing my self. Monkey see monkey do. Lol
I placed valve cover on engine and masked of with paint tape. I had a friend hold the old gear in the center while i traced it with a sharpie to use as a reference point for cutting. I have 3 covers by the way so i wasn't scared to f#<k it up. I used a grinder with a 4 1/2 inch wheel i cut out most material then put the grinder flat to smooth out the semi circle. I also had my boy hold it still and did it out side lots of aluminum dust bi product. WARNING!!!!! Use thick gloves and eye wear. I cut my finger by the knuckle not paying attention. It didn't hurt but, the blood was at a gushing rate. I got nervous the bleeding wouldn't stop.. it was pretty deep. I went to the ER thinking i needed stitches. The doctor said they can't stitch abrasions
I got a xray to see if there were fragments in my flesh... thank God there were None. Had to get tetanus shot And bandages.. then i was on my home now.
I wanted every aspect of this engine bullet proof. (not literally ) I picked up a new thermostat & gasket from advance.
Drove all the way home, took out the old one and POW BullSj!t. The new one was 1/2 the size. I had to drive back there (fml) @that point. Turns out these idiots list h23 and f22 thermostats even though they clicked trim level SI Vtec. Advice If u get one from one of those guys advanced or autozone who ever. Make sure the part description says Vtec. On top of that they had to order the bigger gasket double (fml). Sorry for the poor pic.
LOOK bandages came in the mail.
It's true time of delivery... AEM cam gears. To my surprise they are extremely light weight. The gears came locked in to 0 already. They look awesome by the way. Each gears comes with a load of instructions for those people who's engine is still mounted in the car and a AEM decal. I purchased them from a seller called real street on Ebay for $210 shipped. I took this time to install the new cam seals from Honda i previously ordered.
NEXT UP
When i was at Honda day at Atco Raceway in NJ, i was checking out other guys set up and i saw somthing cool that is useful. On the giveaway car which was a acura integra type r. The valve & timing cover was cut out to allow any tuner to adjust the cams with out taking the valve cover off. So i did the same thing my self. Monkey see monkey do. Lol
I placed valve cover on engine and masked of with paint tape. I had a friend hold the old gear in the center while i traced it with a sharpie to use as a reference point for cutting. I have 3 covers by the way so i wasn't scared to f#<k it up. I used a grinder with a 4 1/2 inch wheel i cut out most material then put the grinder flat to smooth out the semi circle. I also had my boy hold it still and did it out side lots of aluminum dust bi product. WARNING!!!!! Use thick gloves and eye wear. I cut my finger by the knuckle not paying attention. It didn't hurt but, the blood was at a gushing rate. I got nervous the bleeding wouldn't stop.. it was pretty deep. I went to the ER thinking i needed stitches. The doctor said they can't stitch abrasions
I got a xray to see if there were fragments in my flesh... thank God there were None. Had to get tetanus shot And bandages.. then i was on my home now.
I wanted every aspect of this engine bullet proof. (not literally ) I picked up a new thermostat & gasket from advance.
Drove all the way home, took out the old one and POW BullSj!t. The new one was 1/2 the size. I had to drive back there (fml) @that point. Turns out these idiots list h23 and f22 thermostats even though they clicked trim level SI Vtec. Advice If u get one from one of those guys advanced or autozone who ever. Make sure the part description says Vtec. On top of that they had to order the bigger gasket double (fml). Sorry for the poor pic.
Comment