Announcement

Collapse
No announcement yet.

'91 Sedan: rear bottom seat cushion bracket question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    '91 Sedan: rear bottom seat cushion bracket question

    Dear Accord Hive Mind,

    I'm about to reinstall my rear seat cushion bottom and I've noticed the center bracket isn't quite lining up. It's got a little kink in it, and I can't tell if it was originally like that or somehow I bent it with all the handling I've done with it while reupholstering. Maybe it's supposed to be oriented downward?

    Am I missing a spacer of some sort? I don't see one in the diagram, but I do see the bracket flipped into the up position.

    I did check and the cushion appears to be down and fully seated (hehe).

    I haven't seen any pics of how it's attached and I removed it too fast when I took the seat out.

    Here's my cushion/bracket:

    My '91 LX build. Bought September 2017. Sold June 2020.
    http://www.cb7tuner.com/vbb/showthre...r /> t=209871
    Current mileage: 399450 5/18/2020

    My '92 LX build. Bought Novemeber 2019. http://www.cb7tuner.com/vbb/showthre...91#post3293791
    Current mileage: 422679 11/21/19

    #2
    No spacer in any one I'v ever taken out. It is usually bent up so that it sits flat against the floor at the hole; you'll have to lean on the seat some. Double check the front hooks.
    Last edited by Fleetw00d; 04-04-2019, 10:27 PM.
    90 LX 4dr 5 spd 396,014 (sold 1/1/2022) - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
    08 Element LX FWD AT 229,000 - MRT: fleetw00d : 2008 Honda Element LX - CB7Tuner Forums

    Comment

    Working...
    X