CB7Tuner Forums

Go Back   CB7Tuner Forums > Site Features > DIYs > Interior DIYs

Reply
 
Thread Tools Rating: Thread Rating: 5 votes, 5.00 average. Display Modes
Old 05-20-2008, 07:38 PM   #21
xkjnboix
CB7tuner Member
 
Join Date: Jan 2007
Location: Baton Rouge, Louisiana
Posts: 2,050
xkjnboix seems to have made some friends!
Send a message via AIM to xkjnboix
yeah pix are smalll. haha nah i did a direct seat swap. everything is plug and play. i found the door pannels out the junkyard just randomly one day they had a cb7 in the junkyard with grey leather( i jacked his dash and carpet too ^_^ turned out real nicely and i got the stock floor mats from the 5th gen accord.

im not trying to rub anything in at all hehe. u get what u pay for and u got a good quality product and u did the labor urself. u got ballz and skills for that. im glad it turned out so nicely. i really like it ^_^ the only real work i did on mine was regluing some of the leather back on the door pannels and laying the leather on my whole back dash.
__________________
frostwhite225@gmail.com =VENMO


http://www.youtube.com/watch?v=NOB38zJu66o

[color="Magenta"]
xkjnboix is offline   Reply With Quote
Old 05-20-2008, 08:02 PM   #22
Straight Success
Contributing Member
 
Join Date: Jan 2007
Location: Somewhere on God's Green Earth!
Posts: 2,965
Straight Success is someone to admire Straight Success is someone to admire Straight Success is someone to admire
DAMN! Excellent job. Your time and effort has saved me about 1-2 thousand. Thanks a whole (H-E- double hockey stick) of a lot. Great write too. Can you get an encore?
__________________
The Lord watches over me!


Straight Success is offline   Reply With Quote
Old 05-20-2008, 09:59 PM   #23
JDM_CB7_TX
CB7tuner Member
 
Join Date: May 2007
Location: San Antonio, Tx
Posts: 1,516
JDM_CB7_TX is cool... so far.
Nice. Now I need to do this to my seats. Nice Diy man. And thanks TAS!
__________________

CB7Tuner Resident Gamer!
PSN: JDMcb7TX
JDM_CB7_TX is offline   Reply With Quote
Old 10-24-2008, 05:15 PM   #24
cb95spd
CB7tuner Member
 
Join Date: Dec 2007
Location: 251 (but 757 born & raised)
Posts: 2,168
cb95spd is cool... so far.
great DIY
cb95spd is offline   Reply With Quote
Old 11-21-2008, 09:30 AM   #25
KRIS05VVTi
CB7tuner Member
 
Join Date: Jun 2008
Location: Newark, NJ
Posts: 1,144
KRIS05VVTi is cool... so far.
Send a message via AIM to KRIS05VVTi Send a message via MSN to KRIS05VVTi
a little advice....to get the wrinkles out, use a heat gun(looks like a hair dryer) and go over it several times, thus making the fabric "shrink" and fit nice and snug

also you stated you got this fron Katzkin...something you might have wanted to do right after you got it was go over and re-sow it, because this goes through an assembly line one person sows one part, the other person sows another part, and so on and so fourth, so re-sowing it would make it last even longer.

p.s. i like the aluminum bar under the seat idea =]
__________________


Purchased from: 90-JDMCB7, cb95spd, 92_dr_p, ukaccord92, slammed4thgen, 93a-lude, h22anow, cb7addicted, H22WAGON93, tonymontana1204, agol, Joshy

Sold to: di2accord


Last edited by KRIS05VVTi; 11-23-2008 at 06:42 PM. Reason: =P
KRIS05VVTi is offline   Reply With Quote
Old 01-26-2011, 05:02 PM   #26
Gtseviper
CB7tuner Member
 
Join Date: May 2004
Location: Savannah
Posts: 576
Gtseviper is cool... so far.
how did you remove the rod in the middle of the seat
thanks
__________________
New paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods

Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Gtseviper is offline   Reply With Quote
Old 01-26-2011, 05:55 PM   #27
TypeG
Moderator
 
Join Date: May 2005
Location: Slingin Suds in ATL
Posts: 6,857
TypeG is very helpful TypeG is very helpful
Quote:
Originally Posted by Gtseviper View Post
how did you remove the rod in the middle of the seat
thanks
not sure what rod you are talking about.

the lower cushion is bolted to the rails. later.
__________________
Avoiding dirt at all costs

TypeG is offline   Reply With Quote
Old 01-26-2011, 07:24 PM   #28
Gtseviper
CB7tuner Member
 
Join Date: May 2004
Location: Savannah
Posts: 576
Gtseviper is cool... so far.
I got most of the seat cover was off until I came in contact with the seams from the front seat...I couldn't figure out how to remove it without damaging the loop it was going through
thanks
__________________
New paint job and bumper 8/8/11
tsx retrofit
f22b dohc boosted
custom gauges pods

Motivation is one of the keys to life....tell me "can't" and I wll show you I can
Gtseviper is offline   Reply With Quote
Old 02-06-2011, 12:39 AM   #29
crazymikey
CB7tuner Member
 
Join Date: Dec 2009
Location: Alberta
Posts: 4,282
crazymikey is very helpful crazymikey is very helpful
Great write up. It's really not a hard job to do. Just take your time.

For 4 years I used to build seats for Chrysler and Honda, so I'm very anal when it comes to my interiors.
crazymikey is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:51 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.