Announcement

Collapse
1 of 2 < >

ANY BUYING/SELLING IN THIS FORUM WILL RESULT IN AN INSTANT BAN!

Read the rules: http://www.cb7tuner.com/vbb/showthread.php?t=43956

Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
2 of 2 < >

Beginner Forum Rules - EVERYBODY read! (old and new members alike!)

Beginners start here. Once you have 30 worthwhile posts (off topic doesn't count) you may post outside of the Beginner forums. Any "whoring" (posting simply to raise your post count) will return your count to 0, or result in a ban.

These are the rules. Read them. Live by them.

1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.

2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.

3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.

4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.

The rules can and will be added to. Any updates will be marked in the title.

The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
See more
See less

Megan Toe arms causing issues? help appreciated!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Megan Toe arms causing issues? help appreciated!!

    Ok guys so this is my wagon. Recently did rear toe arms and when i went to sit the car down it tucked way to much the car dropped an extra inch and a half well i did the passenger side and not the drivers. Going to move my car to our new house i test drove it and i was rubbing on my passenger side. Pulled into the drive way pulled the ebrake parked it. Decided im gonna put my stocks on so i dont rub real bad but the car no longer sat to low. I put the car in gear and dropped the ebrake the car dropped again in the rear but only on the drivers side. Any idea why?


    https://www.facebook.com/photo.php?f...type=3&theater

    #2
    Honestly, I would never trust any Megan components on my car. They're nothing more than a generic knockoff company. They don't actually engineer anything, and their quality control is questionable.

    You have to link to the actual image, not the page the image is located on. We can't see what you're talking about. For now, I'd suggest just setting it back to stock.






    Comment


      #3
      I just dont understand how this could cause this. Before the job was done passenger side did it. Then i finished and now driver side did it but driver side still has stock ecentric adjusting toe arm

      Comment


        #4
        And i drove the car around the back and it sat a little lower on the pass side than it used to got home put up ebrake put it in gear let off ebrake this happened

        Comment


          #5
          when you installed the megans, did you adjust the length of them to match the stock ones you took out?

          Comment


            #6
            Yes.

            Comment

            Working...
            X