I've yet to find answers to this problem. I have found some posts with the topic but none answering the problem.
Basically, on cold start up, once my engine begins to warm up, vtec will engage once or twice, and it pulls nice!
but shortly after the engine has reached normal operating temp, vtec will not engage.
I do regular oil changes, and my vtec was engaging beautifully before. It just all of a sudden decided to stop. I think it could have something to do with the summer? I unno... cause winter it ran fine all the time, and now it is only working when the engine has sat for a while enough to cool off for a bit. if its warm, it wont engage.
i have an h22a swap with m2b4 lsd and the stock ecu from the prelude that the motor came from.
Basically, on cold start up, once my engine begins to warm up, vtec will engage once or twice, and it pulls nice!
but shortly after the engine has reached normal operating temp, vtec will not engage.
I do regular oil changes, and my vtec was engaging beautifully before. It just all of a sudden decided to stop. I think it could have something to do with the summer? I unno... cause winter it ran fine all the time, and now it is only working when the engine has sat for a while enough to cool off for a bit. if its warm, it wont engage.
i have an h22a swap with m2b4 lsd and the stock ecu from the prelude that the motor came from.
Comment