CB7Tuner Forums

Go Back   CB7Tuner Forums > Parts & Performance > Technical

Reply
 
Thread Tools Rate Thread Display Modes
Old 10-11-2018, 01:25 PM   #1
G. Wiffington
CB7tuner Member
 
Join Date: Mar 2016
Location: Baltimore, Maryland
Posts: 291
G. Wiffington is cool... so far.
Wideband dims sometimes

I thought I had this issue figured out, I guess not.

I have noticed that sometimes my AEM wideband will start to dim as if it is not
getting good voltage or maybe a bad ground.

That is probably the issue either a bad ground or voltage/wiring issue.

I have the wideband grounded at that thermostat housing (ECU ground).
& the power is going running off a quick splice connector at pin : A25
(per Xenocron DIY)

I do not think it is within the wiring of the power because I noticed the same
dimming of the wideband when I had it powered through the fusebox in the
kick panel on the driver's side. I just recently moved my power wire to
pin A25 this weekend along with installing a new alternator because I
noticed in SManager my battery voltage was only in the 11's.

But, the grounding wire I used to run to the thermostat housing is a thinner
wire (higher gauge) than what comes from the wideband. Could that be
an issue for the grounding aspect due to a thinner wire?

I did not go over all my main grounds yet but, I was just wondering if you
guys had any ideas or input?
G. Wiffington is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:01 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.