** i know this is an old subject, but i was following a link from a current thread...**
go buy a 3wire-to-2wire universal trailer hitch module. no dual filament bulbs or sockets; use the stock stuff you already have! on one side of the module, it accepts the individual signals and parking lights coming from the car. on the other side, it has a single wire going to each of the bulbs. there might be a ground on one or both sides. basically all you do is cut one wire (probe with test light for positive wire; do not cut the negative wire) of the stock wire pairs and then wire in this module. however, the module is like $15.
go buy a 3wire-to-2wire universal trailer hitch module. no dual filament bulbs or sockets; use the stock stuff you already have! on one side of the module, it accepts the individual signals and parking lights coming from the car. on the other side, it has a single wire going to each of the bulbs. there might be a ground on one or both sides. basically all you do is cut one wire (probe with test light for positive wire; do not cut the negative wire) of the stock wire pairs and then wire in this module. however, the module is like $15.
Comment