Raf99 : 1993 Accord EX - Page 51

af_1132 · 08-01-2014, 01:57 AM

Quote:

Originally Posted by Raf99

Well, send the S300 back to California, the supplier tested it and it passed all tests. Not sure who's lying now..

Dude, what the heck??? That is so frustrating!

Tell Hondata everything that transpired regarding this problem and see what they have to say.

Raf99 · 08-01-2014, 07:18 PM

Quote:

Originally Posted by af_1132

Dude, what the heck??? That is so frustrating!

Tell Hondata everything that transpired regarding this problem and see what they have to say.

The tuner I deal with is a hondata dealer. And so is the place I ordered the S300. So one of them are lying. My tuner tried several other S300's and had no issues. So I'm leaning towards HAMotorsports knowing the ECU was bad but not admitting it. But I don't think that either because they are giving me a whole new ECU, no charge, even though mine was out of warranty and the tuner opened it up.

tough call i know. So I gave my tuner HAMotorsports email and they have been battling it out at each other now. I basically went to my tuner and told him to sort it out and that I didn't want to be the middle man. I just want my car to work...

ECU (with new internals) is being shipped back to me tomorrow...

af_1132 · 08-04-2014, 06:43 PM

Quote:

Originally Posted by Raf99

The Zonda R was always my favorite car. But I also had no idea about this, I can't imagine what these folks will come up with next....

And now, Hennesey is coming out with this: the F5

https://autos.yahoo.com/blogs/motora...143908780.html

Restless · 08-04-2014, 07:22 PM

Quote:

Originally Posted by Raf99

The tuner I deal with is a hondata dealer. And so is the place I ordered the S300. So one of them are lying. My tuner tried several other S300's and had no issues. So I'm leaning towards HAMotorsports knowing the ECU was bad but not admitting it. But I don't think that either because they are giving me a whole new ECU, no charge, even though mine was out of warranty and the tuner opened it up.

tough call i know. So I gave my tuner HAMotorsports email and they have been battling it out at each other now. I basically went to my tuner and told him to sort it out and that I didn't want to be the middle man. I just want my car to work...

ECU (with new internals) is being shipped back to me tomorrow...

I hope everything works out man. I'm currently about to tune my car soon with the S300 V2 in a P28 installed by swapshopracing, but my AC won't turn on with the Hondata ECU however for my chipped P28 it works perfectly fine. Fingers crossed it's not the ECU because I purchased it like 2-3 years ago or else I'll be in the same boat as you.

Stoner51 · 08-04-2014, 07:33 PM

Man. That is really a bummer. When I purchased my s300 I sent my chipped p06 to pherable and they installed it. Knock on wood I've had no problems.

Have you actually looked at the ECU or are you not bothering and letting them handle it. I would think that anybody that sells ecu's would surely know how to solder. Maybe you just have a bad cap. That should be a fairly easy fix.

I just picked up 2 more backup ecu's over the weekend. Another p06 I plan to chip and a p28. I have been looking for a p72 but have given up.

Restless there is a setting in the s300 software to disable the ac at a certain rpm. I'm sure you check but if not you might want to .

steve

Restless · 08-05-2014, 11:12 AM

Quote:

Originally Posted by Stoner51

Restless there is a setting in the s300 software to disable the ac at a certain rpm. I'm sure you check but if not you might want to .

steve

Appreciate the advice Stoner51

, but yeah I've tried that already when I uploaded my basemap from phearable. One day it will be fixed lol.

DanCan · 08-05-2014, 02:45 PM

Looks pretty damn clean for a Canadian CB. Keep up the good work, looks like you take good care of her.

Raf99 · 08-06-2014, 10:28 PM

Quote:

Originally Posted by DanCan

Looks pretty damn clean for a Canadian CB. Keep up the good work, looks like you take good care of her.

Thanks man. I've been to your page many times

Raf99 · 08-19-2014, 07:00 PM

Low end boost tuning. About 7psi here. We will be going up around 17psi but the exact amount yet to be determined

af_1132 · 08-19-2014, 08:10 PM

Yes! It is happening! Can you post up a video of the pulls? You got your ECU back with new internals, right?

Raf99 · 08-19-2014, 09:05 PM

haha. you guys rock. ECU is back, all is well! We did some low boost / low cam pulls. We were at 201/163 at 7psi around 6000rpm. Tomorrow is high cam profile engage with high boost, hoping to get 350-400hp with 14-17psi

Video doesn't do this justice. The car sounds amazing! 3" exhaust all the way back with a magnaflow muffler.

I'll try to get more videos tomorrow!

ol blue · 08-19-2014, 09:15 PM

This thing sounds nuts. Glad to see it finally running.

Restless · 08-19-2014, 10:37 PM

Glad to see your car on the dyno. By the way the your engine bay is looking clean

.

XCRN · 08-19-2014, 11:18 PM

And still some summer to enjoy it!

Raf99 · 08-20-2014, 05:06 AM

Quote:

Originally Posted by XCRN

And still some summer to enjoy it!

Barely!

dahubby · 08-20-2014, 08:17 AM

Sounds like its on the runway, ready to take off.... Im happy for you man. I know its been a struggle but the final result is awesome...

Lucien · 08-20-2014, 04:26 PM

WAAAAAAAAAAAAAAA

PSSSSSSSHHH

WAAAAAAAAAAA

PSSSSSSHH

Raf99 · 08-20-2014, 08:03 PM

asdfa;sdifjlasdfoha pdfhadf ha;dsofh 'AW[FIJwefsdfaodsf

wow...... ....... ........ ............... ............... .............. ........ ....... .................... ....ahhhhhhhh wow...

So I took the car for a drive today for the first time today. We are half way through the tune and these are the results at 9psi at 7500rpm. We still have to tune up to 17psi which will should be around 400hp.

Words cannot explain the high. The happiness this brings to one

I have never been able to spin the tires in 3rd and 4th gear before. It's........ amazing! The car has so much power it is scary, but a good scary.

Still trying to get some videos though.

Andrewasoar · 08-20-2014, 11:15 PM

I'm so excited for you man! It's great to see that it's all coming together for you.

af_1132 · 08-21-2014, 01:05 AM

By far, this is Canada's craziest CB!

It would be epic, ABSOLUTELY EPIC, to see 2point6, you, NWAccord, and BoostLee take a pass together down the Zmax Drag Way after you get tuned to the full 17 psi.

08-04-2014, 07:33 PM	#1005
Stoner51 CB7tuner Member Join Date: Jul 2005 Location: Alabama Posts: 992	Man. That is really a bummer. When I purchased my s300 I sent my chipped p06 to pherable and they installed it. Knock on wood I've had no problems. Have you actually looked at the ECU or are you not bothering and letting them handle it. I would think that anybody that sells ecu's would surely know how to solder. Maybe you just have a bad cap. That should be a fairly easy fix. I just picked up 2 more backup ecu's over the weekend. Another p06 I plan to chip and a p28. I have been looking for a p72 but have given up. Restless there is a setting in the s300 software to disable the ac at a certain rpm. I'm sure you check but if not you might want to . steve __________________

08-05-2014, 02:45 PM	#1007
DanCan CB7tuner Member Join Date: Mar 2012 Location: Canada, Eh! Posts: 307	Looks pretty damn clean for a Canadian CB. Keep up the good work, looks like you take good care of her. __________________ Project:Black Skittle AOM->April 2014 MRT->http://www.cb7tuner.com/vbb/showthread.php?t=199779

08-19-2014, 08:10 PM	#1010
af_1132 CB7tuner Member Join Date: Feb 2014 Location: Santa Cruz, CA Posts: 484	Yes! It is happening! Can you post up a video of the pulls? You got your ECU back with new internals, right? __________________ * Think of others before thinking of yourself. * ******** Spread love, not hate. ******* Lift others up with kind and helpful words** F20A_CB7, I miss you, but I will see you one day. "Nothing a little prayer can't fix." MRT FS Thread 15.10 @ 90.42mph The quest for 9s ceased, now the goal is a circuit track monster!

08-19-2014, 09:05 PM	#1011
Raf99 Gold Member Join Date: Mar 2007 Location: NS, Canada Posts: 2,922	haha. you guys rock. ECU is back, all is well! We did some low boost / low cam pulls. We were at 201/163 at 7psi around 6000rpm. Tomorrow is high cam profile engage with high boost, hoping to get 350-400hp with 14-17psi Video doesn't do this justice. The car sounds amazing! 3" exhaust all the way back with a magnaflow muffler. I'll try to get more videos tomorrow! __________________ 1993 Accord EX Q-logic speaker mod Official Wheel Offset, Lowered, Thread - Pictures Only I hate Toyota Corolla Headlights

08-19-2014, 10:37 PM	#1013
Restless CB7tuner Member Join Date: Mar 2011 Location: Arizona Posts: 198	Glad to see your car on the dyno. By the way the your engine bay is looking clean.

08-19-2014, 07:00 PM	#1009
Raf99 Gold Member Join Date: Mar 2007 Location: NS, Canada Posts: 2,922	Low end boost tuning. About 7psi here. We will be going up around 17psi but the exact amount yet to be determined

08-19-2014, 09:15 PM	#1012
ol blue CB7tuner Member Join Date: Dec 2011 Location: Central MN Posts: 242	This thing sounds nuts. Glad to see it finally running.

08-19-2014, 11:18 PM	#1014
XCRN CB7tuner Member Join Date: May 2013 Location: On a horse with no name. Posts: 773	And still some summer to enjoy it! __________________ Be unique, like every other person. CB7 Sold________________________E34 Sold________________________E39 Current

08-20-2014, 08:17 AM	#1016
dahubby CB7tuner Member Join Date: Jan 2005 Location: Missouri Posts: 80	Sounds like its on the runway, ready to take off.... Im happy for you man. I know its been a struggle but the final result is awesome... __________________ Procrastination is a THIEF of time!! MY MRT http://www.cb7tuner.com/vbb/showthread.php?t=203992 My First CB7 http://www.cardomain.com/ride/705233/1990-honda-accord/ Last edited by dahubby; 08-20-2014 at 08:20 AM.

08-20-2014, 04:26 PM	#1017
Lucien CB7tuner Member Join Date: May 2008 Location: California Posts: 240	WAAAAAAAAAAAAAAA PSSSSSSSHHH WAAAAAAAAAAA PSSSSSSHH

08-20-2014, 08:03 PM	#1018
Raf99 Gold Member Join Date: Mar 2007 Location: NS, Canada Posts: 2,922	asdfa;sdifjlasdfoha pdfhadf ha;dsofh 'AW[FIJwefsdfaodsf wow...... ....... ........ ............... ............... .............. ........ ....... .................... ....ahhhhhhhh wow... So I took the car for a drive today for the first time today. We are half way through the tune and these are the results at 9psi at 7500rpm. We still have to tune up to 17psi which will should be around 400hp. Words cannot explain the high. The happiness this brings to one I have never been able to spin the tires in 3rd and 4th gear before. It's........ amazing! The car has so much power it is scary, but a good scary. Still trying to get some videos though. __________________ 1993 Accord EX Q-logic speaker mod Official Wheel Offset, Lowered, Thread - Pictures Only I hate Toyota Corolla Headlights

08-21-2014, 01:05 AM	#1020
af_1132 CB7tuner Member Join Date: Feb 2014 Location: Santa Cruz, CA Posts: 484	By far, this is Canada's craziest CB! It would be epic, ABSOLUTELY EPIC, to see 2point6, you, NWAccord, and BoostLee take a pass together down the Zmax Drag Way after you get tuned to the full 17 psi. __________________ * Think of others before thinking of yourself. * ******** Spread love, not hate. ******* Lift others up with kind and helpful words** F20A_CB7, I miss you, but I will see you one day. "Nothing a little prayer can't fix." MRT FS Thread 15.10 @ 90.42mph The quest for 9s ceased, now the goal is a circuit track monster!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: