Announcement

Collapse
No announcement yet.

H22a Transmission problems.!?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    H22a Transmission problems.!?

    Hello! Problem here..
    Swapped from f22a to h22a!

    Months later i swapped the automatic tranny to manuell tranny. Got told that the chipped ECU would work with manuell, and it does.

    The engine will not start after swapping, it does not even give a try.. Like it has no power..But thats not the fault.

    Seems like the ECU searches for the "PARK" (P) position on the old gearshifter.

    Can someone here at CBtuner tell me where to find those cables so the ECU knows it is in PARK ? Or what it can be?

    Thank you very much!
    Accord M0DiFi3D From Norway


    Visit Website: http://www.garaget.org/?car=63883

    #2
    Maybe try this link?

    http://www.cb7tuner.com/vbb/showthre...=&threadid=588

    Comment


      #3
      make sure your ground wire bracket is attached to the tranny.
      Current 2016 Ford F150 XLT Sport
      Past 1990 Accord EX Sedan
      Past 1990 Accord LX Sedan
      Past 1991 Accord LX Sedan
      Past 1993 Accord LX Wagon
      Current 1991 Accord EX Wagon

      Comment


        #4
        There are a thick red and black wires underneath the shifter console. Check for which exact ones but they need to be connected so that the car thiks it is in Park or Nuetral
        FOR SALE on cb7tuner only for now. Want it in the right hands
        Pm meX
        I do swaps in NYC/LI area: Hit me up for a quote.

        MY WHIP
        H22A Swap
        I'm 'THE STIG'

        Comment


          #5
          Find the brown plug for your old tranny switch in the center console.
          Now wire those two wires into your clutch pedal.
          Your man for wiring solutions!
          CB7Man's Coupe H22 Swap
          CB7Man's Sedan Resurrected From The Dead

          Comment


            #6
            To the clutch pedal assembly, or to the wires?

            Il give it a try and see if it works. Has someone here had the same problem?
            Accord M0DiFi3D From Norway


            Visit Website: http://www.garaget.org/?car=63883

            Comment


              #7
              umm to the wires....
              One switch is for the Cruise Control and one is for the starter
              The switch that has Pink and Black wireing is for the Cruise, you need to also wire this in at the same place, except at the white plug.
              Just plug the pink and black wires into the pink and black wires of the console plug. Then you also have Cruise Control
              Your man for wiring solutions!
              CB7Man's Coupe H22 Swap
              CB7Man's Sedan Resurrected From The Dead

              Comment

              Working...
              X