5-lug swap ABS problem

[sonikaccord]

So I finished my 5-lug swap not too long ago and my ABS is throwing a code 3-2. I cleaned the sensor and replaced the axle and I'm not sure what else could be wrong with it. Could I replace the abs sensor with one from the Accord v6?

['93CB7Ex]

Check the air gap.

[sonikaccord]

I forgot to mention that I'm running the Acura RL 4-pots and when I drive at low speeds (10-20 mph) the pump and modulator makes a loud noise and is pumping the brake pedal. When I go above this speed it stops...what is going on??

[swk_cb7]

is this on a CB chassis?

[sonikaccord]

Yes it is

[626cb7]

Like 93CB7Ex said. Check the air gap on the rear sensors.

[sonikaccord]

OK I cleaned up the front sensors some more, now it's doing it at around 5-10 MPH. I'll try to tweak it a bit more. Thanks guys.