Ok so today me and my friend set out to get bigger throttle bodies at the junkyard. My friend has a 92 accord f22a1. We,found a h23 and a acura vigor. There were a bunch of cb7 accords all over the place. So we test fit a h23 tb onto a dead ex 92 accord and it fit. When we got back to my place the stupid thing wouldn't bolt up. Any ideas wat to do. I was thinkin swap out the ex upper onto the a1 then boltin up the h23 tb . Or exchange the h23 one for the vigor one we found. We won't have time to do a full h23 mani swap and there were like 20 hornets hovering over the prelude. His goal is more top end power
. As a side note I got a 58 mm tb off a 3.8 caravan to replace my 48 on my 94 shadow 3.0 v6 and it spins through second instead of chirpin so it definetly helped and I didn't even port match and the gasket was to small so I cut it with a blade. Hopfully we can get the accord a little more power tomorow any info would be helpfull
. As a side note I got a 58 mm tb off a 3.8 caravan to replace my 48 on my 94 shadow 3.0 v6 and it spins through second instead of chirpin so it definetly helped and I didn't even port match and the gasket was to small so I cut it with a blade. Hopfully we can get the accord a little more power tomorow any info would be helpfull
Comment