Announcement

Collapse
No announcement yet.

92smokeaccord : 1992 Accord EX

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Today is the day I start to install these !!!!!!
    Out with the old and in with the new. Lots of pictures to come!

    my new turbo build

    Comment


      #17
      Ok so this was one big pain in th ass! So worth it though lol. Only had enough time for the fronts. So far I only have the power seat functions hooked up not the heated seats yet.. Going to attempt the rear seat tomorrow.
      Here some steps I did to gt these fuckers in.

      First I had to move the bolt on the right side rail over about 2 inches. I drilled out a hole just big enough to weld a nut in side of it to mimic the stock look.


      Then I had to drill out another hole on the back flat bolt mount and welded in a nut.


      I then had to cut out the stock body mount and drill a hole in it along with a nut welded insidealso had to move the mount to line up with the seat rail.





      This is them all said and done except heated functions. They look and feel so good. It completely changed the feel of the inside of car. If I wasn't look at a stock dash I never would have guessed this was a early 90s car. Got a lot left to do between next couple eeeks but I'm so happy

      Last edited by 92smokeaccord; 11-21-2017, 09:38 PM.

      my new turbo build

      Comment


        #18
        Those look nice. Coming from a full size Acura I’ll bet they’re comfy. That back seat looks like it might be a tight fit. Some newer carpet from a cd Accord or Acura CL would compliment it nicely. Great work so far.
        5 studded & leather clad - Praise The Lowered

        ~Mark~

        Comment


          #19
          So did a little cleaning and installed my center console. It was down pouring here today so couldn't do the back seats so her s some up front shots




          my new turbo build

          Comment


            #20
            So! I managed to get a free 97-01 prelude carpet in black. I wasn't gonna take it but hell it was free and figured I would experiment. Well I shit you not it fucking fits! It's actually a little bigger but you can trim and there are some tiny issues to address. the center console area where the ebrake cables are, there is a cut out there. Besides the cut out and the trimming you just need to cut out the new holes for the seat mounts and seat belt mounts. I don't have a finished picture yet because I'm gonna put the back seats in tomorrow to finalize the seat swap.

            Here's a couple of pics befor I put the seats back in




            my new turbo build

            Comment


              #21
              Well back seat is in! I'm in love

              Befor


              After

              my new turbo build

              Comment


                #22
                Haha! Much better. The before back seat was hideous.
                5 studded & leather clad - Praise The Lowered

                ~Mark~

                Comment


                  #23
                  I love finding stuff in my storage lol. Guess I'm turboing the 4dr lol

                  my new turbo build

                  Comment


                    #24
                    I'm lowkey debating on turboing the F22a so it blows up, and then I really have to swap it lol


                    KEEP IT NICE, NOT RICE

                    Comment


                      #25
                      Awww, I love that before and after pic!!

                      Comment


                        #26
                        Originally posted by 92smokeaccord View Post
                        I love finding stuff in my storage lol. Guess I'm turboing the 4dr lol
                        Heck yes! Can't wait to see what you do with that!

                        What is that manifold and turbo from?
                        I'm faster then a prius

                        Comment


                          #27
                          Looks like an eclipse with the 14b
                          ~Nick~
                          FSAE (F Series Accord Enthusiasts) ..."A dying breed thats taking it to the next level" Lucky #13
                          MR Thread:http://www.cb7tuner.com/vbb/showthre...ight=Grumpys93

                          Comment


                            #28
                            Originally posted by GTRON View Post
                            Heck yes! Can't wait to see what you do with that!

                            What is that manifold and turbo from?
                            91 eclipse 14b
                            Originally posted by Grumpys93 View Post
                            Looks like an eclipse with the 14b
                            What he said/\

                            my new turbo build

                            Comment


                              #29
                              14b boosted....very nice!
                              glad to see your still doing work...

                              you should come to NJ for HDay Apr 7-8, 2018!
                              MadLab Racing
                              Southern Maryland


                              Comment


                                #30
                                So I started the turbo install today. Got the manifold drilled out to fit. Oil feed deputed and done oil pan drilled and fitting for return jb welded in lol then lost day light so yeah. Called it there. I wanted to do more but after fighting to get everything off this is all I could get done.




                                my new turbo build

                                Comment

                                Working...
                                X