Announcement

Collapse
No announcement yet.

97-99 Acura CL Seat Wiring Diagrams

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    97-99 Acura CL Seat Wiring Diagrams

    If you find a set of front seats from a 97-99 Acura CL, they bolt right in (at least they did into my 93 SE coupe). I lifted the rear of the seat some to install the front two bolts loosely, then dropped the seat down and was able to install the rear bolts without having to modify the holes. Be sure to at least take the pigtail for the car side harness. Wiring diagrams for 1997-1999 Acura 2.3 and 3.0 CL power and heated seats:













    Last edited by Fleetw00d; 08-01-2017, 09:31 PM.
    90 LX 4dr 5 spd 396,014 (sold 1/1/2022) - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
    08 Element LX FWD AT 229,000 - MRT: fleetw00d : 2008 Honda Element LX - CB7Tuner Forums

    #2
    I put a set of 99 2.3L seats in a 1992, if I recall it was fairly simple since the seat did not have heat. Just a 2 pin connector for the power and ground to the power function. The seat belt switch was a separate connector and plugged right in? I could be wrong it was a couple years ago.

    Edit now I remember. It was a 4 pin connector, pretty obvious which ones were power and ground. I grabbed a connector, wired the two 12v+ together and connected it to the accessory tap on the underdash F/B Connected the grounds to a nearby ground connection. Easy peasy.
    Last edited by Accrdwgnguy; 03-30-2017, 02:53 PM.
    1992 Oldsmobile Custom Cruiser

    1986 Chevrolet C10|5.3L|SM465|Shortbed|Custom Deluxe

    1983 Malibu Wagon|TPI 305|T5 5 speed|3.73 non-posi


    1992 Accord Wagon (RETIRED)

    Comment

    Working...
    X