Issued ended up being intake came was a tooth off timing, All fixed now. And car is still for sale lol
-
-
Glad you got it fixed, but the engine should of ran like shit while not in VTEC too. Guessing the added lobe adjustments VTEC does made the issue worse.Originally posted by moore View PostComment
-
What made you check timing?
**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICEComment
-
So when we advanced the timing it would run good at higher rpm's..from vtec engagement(4600) to about 5800 it would have the sputtering issue them around 6 grand it would pull hard but would be very sluggish down low. When we retarded it, it would run good at low rpms, sputter, then fall on its face. We kept trying to find the 'sweet spot' after 3 hours of this my friend gave up and mentioned the timing potentially being off affecting the engine when it's running on the vtec lobes significantly more than when not in vtec. So we checked it and sure as hell it was off.Comment
Comment