|
|
04-25-2017, 09:32 PM
|
#1 |
|
CB7tuner Member
Join Date: Jun 2015
Location: Charlotte, NC
Posts: 263
|
Crack in both front brake pads
During a wheel change today I noticed that both outer brake pads on the front have a small hairline crack on the leading edge. Both sides are almost identical.
 Question is: Is this safe to drive on? The pads still have a lot of life left (Centric Stoptech ceramics).
__________________
1992 EX, 306,000 miles - Track toy - M2S4, H23A1, ST rear swaybar, Wagon brakes, GC coil sleeves, KYB AGX dampers, Stoptech pads, Toyo Proxes R1R, 2.25" exhaust  Stock F22A6 VIR, 5/22/2016: https://youtu.be/eR5-ylSPsxk H23A1 powered NCCAR, 9/4/2016: https://www.youtube.com/watch?v=TI5WpxGrEpE CMP, 10/16/2016: https://youtu.be/DOqoe5f-GLY |
|
|
|
04-25-2017, 11:09 PM
|
#2 |
|
CB7tuner Member
Join Date: Apr 2013
Location: Atlanta
Posts: 1,210
|
It's probably not safe. Usually when this happens, it's a master cylinder issue causing too much force on the pad - cracking it. If you have a lifetime warranty on those, I'd go change them out soon. Better to be safe, man. If it's brakes or suspension, and you question it, repair it.
__________________
|
|
|
|
|
04-25-2017, 11:17 PM
|
#3 |
|
CB7tuner Member
Join Date: Jun 2015
Location: Charlotte, NC
Posts: 263
|
I tend to agree, unfortunately the warranty on Centric is only 90 days. Maybe I should try Powerstop instead.
If anything the pressure on the pad should be lower than stock since I have a stock master cylinder and wagon brakes.
__________________
1992 EX, 306,000 miles - Track toy - M2S4, H23A1, ST rear swaybar, Wagon brakes, GC coil sleeves, KYB AGX dampers, Stoptech pads, Toyo Proxes R1R, 2.25" exhaust Stock F22A6 VIR, 5/22/2016: https://youtu.be/eR5-ylSPsxk H23A1 powered NCCAR, 9/4/2016: https://www.youtube.com/watch?v=TI5WpxGrEpE CMP, 10/16/2016: https://youtu.be/DOqoe5f-GLY Last edited by masospaghetti; 04-25-2017 at 11:23 PM. |
|
|
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
