CB7Tuner Forums

Go Back   CB7Tuner Forums > Parts & Performance > Appearance > Interior

Thread Tools Rating: Thread Rating: 28 votes, 5.00 average. Display Modes
Old 04-12-2012, 11:52 PM   #201
Junior Smurff
CB7tuner Member
Join Date: Sep 2011
Location: Oceanside, CA
Posts: 644
Junior Smurff is cool... so far.
So ive been searching but cant find out how difficut it is to fit front Leather RSX seats in, just pics. Anybody know how much customization needs to be done?? Thanks!!!
Junior Smurff is offline   Reply With Quote
Old 04-27-2012, 01:00 PM   #202
CB7tuner Member
Join Date: Jun 2011
Location: Orig 302 DE currently tehachapi CA
Posts: 980
redlined302 is cool... so far.
Send a message via AIM to redlined302
Originally Posted by blk91coupe View Post
Yes 97-99 Acura CL front seats fit directly but if you have a 90 or 91 you have to change a few things to bolt up the seat belts. I just did the front seats in my car and I changed the inside rail to the accord rail on the passengers side and on the drivers side I fabricated a bracket for the seat belt. I believe I read that the rear bottom seat fits correct but the top rear seat a few things have to be changed and they don't latch still. I'm not sure about the TL seats.
Reps given. Thanks for the info and luckily i have a 93 so hopefully I wont run into any of that
redlined302 is offline   Reply With Quote
Old 11-18-2012, 02:58 AM   #203
CB7tuner Member
Join Date: May 2011
Location: San Jose ,California
Posts: 114
woody7193 is cool... so far.
Originally Posted by itstatcb7kid707 View Post
Replica Recaros i finally have a matching set of front seats lol

Hey bro i was wondering what seat rails did you use?
woody7193 is offline   Reply With Quote
Old 11-02-2013, 10:36 AM   #204
CB7tuner Member
Join Date: Jul 2005
Location: Alabama
Posts: 992
Stoner51 seems to have made some friends!
I realize that you assume this has been answered.

But, do 2001 accord coupe front seats fit in a 91 sedan.
I am just looking at the front. I will get the rear recovered.

I was going to go the cl1 recaro route but I don't think the rear will fit.



91 have the autobelts
Stoner51 is offline   Reply With Quote
Old 12-30-2014, 02:19 PM   #205
CB7tuner Member
Join Date: Jun 2013
Location: Deer Park, Tx
Posts: 40
cky413 is cool... so far.
i know this is an old thread just wanted to add lol Just installed 2003 Acura CL-S Driver and passenger seats.

Modifications: Front bolts line up, Rear needs new holes and threaded. Nice little upgrade for power seats.

cky413 is offline   Reply With Quote
Old 01-04-2015, 06:51 AM   #206
CB7tuner Member
Join Date: Nov 2006
Location: AZ & MI
Posts: 7,191
Losiracer2 seems to have made some friends!
Send a message via AIM to Losiracer2
I'll add a photo of my 02-04 RSX leather seats into the mix. These fit surprisingly well. All the brackets were in the same orientation, just had to drill out the rivets and spotwelds holding them in and reweld them a little bit wider to match up with the CB7 floor bolt pattern.

Got the seats for 180, sold an airbag modulator off the D/S for 45 and payed a guy 150 to fabricate and weld up the 8 brackets in the correct orientation. I can now slide them back/forth and adjust the height without it hitting the roof.

I also found black buckles from and Acura Vigor and swapped those out with the maroon ones.

^^Driver side has adjustable height and lumbar too! which I think is a cool feature.

With JDM Highrise armrest

member's ride thread
93' EX Coupe H22A w/ P2T4 Sir 5spd 191whp 155 wtq
97' Lexus LS400 291k miles.....Luxury Cruiser DD
89' SEi Coupe 42k miles one owner museum find

Last edited by Losiracer2; 01-04-2015 at 06:59 AM.
Losiracer2 is offline   Reply With Quote
Old 11-07-2015, 10:14 PM   #207
CB7tuner Member
Join Date: Dec 2010
Location: Hackettstown, NJ
Posts: 474
Theos92VR4 is cool... so far.
Just picked up some 7th gen (2003-2007) black leather, power-heated seats. Going to try to fit them tomorrow and see what happens!
Theos92VR4 is offline   Reply With Quote
Old 11-16-2015, 09:45 PM   #208
CB7tuner Member
Join Date: Oct 2009
Posts: 1,253
P5ylance is someone to admire P5ylance is someone to admire P5ylance is someone to admire
I bolted CL-S backrests to my accord rails with vigor black leather cushions. my seats remain manual and ridiculously low to the ground hehe
blackROSE Member, with a focus on VIP Style
P5ylance is offline   Reply With Quote
Old 05-01-2016, 09:47 AM   #209
CB7tuner Member
Join Date: Jun 2007
Posts: 249
TurboZach is cool... so far.
Type R recaro... got a pair for a steal from a local guy who couldn't sell them online, not much of a honda market here. Wedge bracket to bolt to the floor, but it really needs a boost, it's way too low.

TurboZach is offline   Reply With Quote
Old 07-24-2017, 03:51 PM   #210
CB7tuner Member
Join Date: Jan 2007
Location: Baton Rouge, Louisiana
Posts: 2,050
xkjnboix seems to have made some friends!
Send a message via AIM to xkjnboix
6th gen accord coupe seats DO NOT fit (without modification) in a cb7 sedan.
the 6th gen rail toward the middle of the vehicle mounts to the tunnel and not to the floor like the 4th and 5th gen acccords.

it may be possible to swap the rails because their pattern appears to be the same but i was unable to attempt this due to stubborn bolts at the junker.
frostwhite225@gmail.com =VENMO


xkjnboix is offline   Reply With Quote
Old 07-25-2017, 04:30 PM   #211
CB7tuner Member
Join Date: Jun 2017
Location: CT
Posts: 55
AhYesCB7 is cool... so far.
Factory leather but with 6 way power and dual stage heat. CL head rests. Might be a one off joint.

AhYesCB7 is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 02:45 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.