CB7Tuner Forums

Go Back   CB7Tuner Forums > Beginner forum -- New members post here! > Beginner Image Gallery

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-06-2015, 08:35 PM   #1
talonted1990
CB7tuner Member
 
Join Date: Feb 2015
Location: NC
Posts: 33
talonted1990 is cool... so far.
My 93 Honda Accord LX

I figured it was time to post on here, I have been lurking for a couple of years and just decided to join. Here is my 93 LX. The driver's side is rough but the passenger side is pretty clean. Neither of the windows on the driver's side work.



Last edited by talonted1990; 08-12-2015 at 07:02 PM. Reason: added pictures and text
talonted1990 is offline   Reply With Quote
Old 07-06-2015, 09:22 PM   #2
fleetw00d
Contributing Member
 
Join Date: Mar 2007
Location: West Chester, Ohio
Posts: 2,519
fleetw00d is very helpful fleetw00d is very helpful
Welcome! You should have flipped the picture of the passenger side; then see if anyone would notice. The fender is fairly easy to take care of, quarter panels not so much. You might send some photos to a paintless dent repair service to see if they think they could undo the damage (you may still have to do some paint work). Lots of potential!
__________________
90 LX 4dr 5 spd 369,000 - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
93 LX wagon auto 252,000 MRT: http://www.cb7tuner.com/vbb/showthread.php?t=208490
92 EX coupe auto 169,000 - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=205114
92 EX coupe auto 190,000 - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=210341

LOTS of CB7 parts for sale http://www.cb7tuner.com/vbb/showthread.php?t=192583 or watch for banner ad at upper right
fleetw00d is offline   Reply With Quote
Old 07-07-2015, 11:41 AM   #3
talonted1990
CB7tuner Member
 
Join Date: Feb 2015
Location: NC
Posts: 33
talonted1990 is cool... so far.
Quote:
Originally Posted by fleetw00d View Post
Welcome! You should have flipped the picture of the passenger side; then see if anyone would notice. The fender is fairly easy to take care of, quarter panels not so much. You might send some photos to a paintless dent repair service to see if they think they could undo the damage (you may still have to do some paint work). Lots of potential!
Thanks, I didn't think about flipping the picture. I am trying to fix things here and there and the body is last on the list.
talonted1990 is offline   Reply With Quote
Old 07-07-2015, 11:44 AM   #4
talonted1990
CB7tuner Member
 
Join Date: Feb 2015
Location: NC
Posts: 33
talonted1990 is cool... so far.
My car had a huge exhaust leak when I got it, it was cheaper to replace the exhaust manifold than repair the factory piece. I have to find a stud kit for my exhaust manifold. I also replaced the muffler to pass state inspection.

Last edited by talonted1990; 07-07-2015 at 11:13 PM. Reason: added text
talonted1990 is offline   Reply With Quote
Old 07-07-2015, 08:47 PM   #5
Agnes93coupe
Newcomer
 
Join Date: Sep 2014
Location: Florida
Posts: 26
Agnes93coupe is cool... so far.
Quote:
Originally Posted by talonted1990 View Post
My car had a huge exhaust leak when I got it, it was cheaper to replace the exhaust manifold than repair the factory piece. I have to find a stud kit for my exhaust manifold.
Looks good man!! i must agree with Fleetwood, ALOT of potential!! nice upgrade on purchasing a header than trying to cause yourself misery trying to repair a stock manifold!! I'm also sure you feel a difference in throttle response and sound!!
Agnes93coupe is offline   Reply With Quote
Old 07-07-2015, 11:09 PM   #6
talonted1990
CB7tuner Member
 
Join Date: Feb 2015
Location: NC
Posts: 33
talonted1990 is cool... so far.
A little DIY grill I did. I wanted to see how much I would like the way my car looks with a new grill and I like it alot.


Next up is painting the wiper arms and side pillars.
talonted1990 is offline   Reply With Quote
Old 07-10-2015, 03:41 PM   #7
talonted1990
CB7tuner Member
 
Join Date: Feb 2015
Location: NC
Posts: 33
talonted1990 is cool... so far.
Quote:
Originally Posted by Agnes93coupe View Post
Looks good man!! i must agree with Fleetwood, ALOT of potential!! nice upgrade on purchasing a header than trying to cause yourself misery trying to repair a stock manifold!! I'm also sure you feel a difference in throttle response and sound!!
Thanks, I don't know how it sounded before because it was so loud with the flex pipe separated I didn't drive it much.
talonted1990 is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:32 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.