CB7Tuner Forums

Go Back   CB7Tuner Forums > Parts & Performance > Suspension

Reply
 
Thread Tools Rate Thread Display Modes
Old 12-27-2016, 06:45 PM   #21
fleetw00d
Contributing Member
 
Join Date: Mar 2007
Location: West Chester, Ohio
Posts: 2,185
fleetw00d seems to have made some friends! fleetw00d seems to have made some friends!
Quote:
Originally Posted by G. Wiffington View Post
I know this seems like a dumb question but, does anybody know exactly what
the part number for the rear lower strut bolt?

I found : 90021-SM4-003 part #15 http://www.hondaautomotiveparts.com/...ER&vinsrch=yes

I also found : 52366-SM4-003 part #26 http://www.hondaautomotiveparts.com/...RM&vinsrch=yes
The first one (#15) is the bolt for the lower end of the shock to the knuckle.

The second one (#26) goes through the outer end of both control arms and the knuckle; it is at least twice as long as the first.
__________________
90 LX 4dr 5 spd 356,000 - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
93 LX wagon auto 240,000 MRT:http://www.cb7tuner.com/vbb/showthread.php?t=208490
92 EX coupe auto 165,000 - MRT:http://www.cb7tuner.com/vbb/showthread.php?t=205114

LOTS of CB7 parts for sale http://www.cb7tuner.com/vbb/showthread.php?t=192583

I understand that all my picture links are broken; I'm trying to recover all my photos and move to a new service. Please be patient.

Last edited by fleetw00d; 12-27-2016 at 06:50 PM.
fleetw00d is offline   Reply With Quote
Old 12-29-2016, 08:39 AM   #22
G. Wiffington
CB7tuner Member
 
Join Date: Mar 2016
Location: Baltimore, Maryland
Posts: 163
G. Wiffington is cool... so far.
Thanks, I was at work the other day looking at the diagram. I crawled under my car after work & looked. I appreciate the help.
G. Wiffington is offline   Reply With Quote
Old 04-15-2017, 09:50 AM   #23
G. Wiffington
CB7tuner Member
 
Join Date: Mar 2016
Location: Baltimore, Maryland
Posts: 163
G. Wiffington is cool... so far.
Quote:
Originally Posted by illinois_erik View Post
if you have at the minimum a torch hacksaw blade, hammer, old screwdriver or cold chisel and maybe a pointy punch you can remove the oem ones properly

getting the new RUBBER ones in just requires some sand paper, grease a stack of fender washers, bolt and nut and some wrenches.



monroe makes them for 12 bucks a pop.








**I just installed my whole suspension (shocks, springs) & I replaced these lower strut mount bushings. This method is the one I used & was probably the easiest procedure on my CB so far regarding suspension.
G. Wiffington is offline   Reply With Quote
Old 04-21-2017, 07:05 AM   #24
deevergote
Don't call me dude.
 
Join Date: Aug 2003
Location: Not New York
Posts: 39,849
deevergote . You'll never be this cool... deevergote . You'll never be this cool... deevergote . You'll never be this cool... deevergote . You'll never be this cool... deevergote . You'll never be this cool... deevergote . You'll never be this cool...
Send a message via AIM to deevergote
I wish I had seen that method when I did mine! That would have made things so much easier!
__________________
BUY MY STUFF!!!
NEW PRICES ADDED 09/24/2016

AEM TruTime cam gears (H22A), DSM 450cc injectors, Eaton M45 superchrager






deevergote is offline   Reply With Quote
Old 04-26-2017, 12:54 PM   #25
G. Wiffington
CB7tuner Member
 
Join Date: Mar 2016
Location: Baltimore, Maryland
Posts: 163
G. Wiffington is cool... so far.
Quote:
Originally Posted by deevergote View Post
I wish I had seen that method when I did mine! That would have made things so much easier!
I forgot to post an update to this. I did use this method with the washers & long bolt. It was by far the EASIEST way I have ever pressed in a bushing. It is amazing how little techniques like that make a job so much easier.

I also used a 1 1/4" hole saw drill bit to remove the inner metal piece as well as the bushing. That literally took 30 seconds max on each side.
G. Wiffington is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:46 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.