Torque steer?

[TheSnigg]

Peace! I'm really appreciating this community, honestly one of the best forums I have been on.

So I noticed I have been having some pull to the passenger side under heavier acceleration. This was an issue ever since i swapped the engine. I thought it was going to be a bushing issue but all the bushings and ball joints have been replaced. The car as been aligned and there is more positive caster on the passenger side than the driver side. Would this be the problem. If so should I drop the tension rods and re-install?

[marcusv8thunder]

Most likely the radius rod arms, check they are not worn or loose. Also it would affect braking either pull straight or worse pull right.