got an rl caliper mounted up to a 01 accord ex knuckle and having the 350z brembo rotor make contact with my caliper on the inner portion on the passenger side. the driver side bolts right up with no issues.
The brake pad can be pressed in but it is very very tight and wheel wont move really at all because the pressure applied to the rotor is too great after..
Thought about mounting up a hardened 1mm washer or spacer sandwiched in between the knuckle mounting tab and the inside of the ffc rl bracket to clear the offset...
anyone else have this issue or heard about someone else having this problem? I thought about just mounting it up and saying f it but not really a fan of that.
The brake pad can be pressed in but it is very very tight and wheel wont move really at all because the pressure applied to the rotor is too great after..
Thought about mounting up a hardened 1mm washer or spacer sandwiched in between the knuckle mounting tab and the inside of the ffc rl bracket to clear the offset...
anyone else have this issue or heard about someone else having this problem? I thought about just mounting it up and saying f it but not really a fan of that.
Comment