Announcement

Collapse
No announcement yet.

marcusv8thunder : 1991 Accord 2.2i 4WS (3)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    marcusv8thunder : 1991 Accord 2.2i 4WS (3)

    Got hit by the data lost last month, having to remake this.

    If you seen it before, well act surprised lol!

    Well this wasnt planned, but a guy on my UK accord forum put up for sale this beaut, and after working a few things out i bought it.

    So here it is:

    1991 Accord UKDM 2.2i 4WS CB7

    Engine:

    F22A3 SOHC 150bhp (58k!) PT4 ECU and with intake butterflies


    Interior:

    Clean Type A EDM Grey Leather Seats
    Charcoal Carpet and black Dash
    OEM Dash mat


    Exterior:

    Standard


    Electronics:
    Alarm, immobilizer and keyless entry system.
    Full electrical adjusting seats
    Cruise Control
    Air Conditioning
    Electric heated mirrors
    Electric sunroof
    Electric windows
    Intergrated rear fog
    Auto wind down antenna on boot release
    Headlight washers

    Suspension:

    4WS!
    Honda 15" Aluminium wheels
    Dunlop 195/60/15


    Immediate future plans:

    Restore paintwork
    Fix up the little bits
    play with the 4ws system


    On the way back, Ended up being a night mission, didnt get into bed til 2.30am due to road diversion and loading and unloading etc.



    9am the next morning, all 3 CB's!! just lol



    The goodies:

    OEM Dash mat



    Leather steering wheel



    Full electrical adjusting seat



    Mint grey leather





    4WS System



    Different rear suspension geometry to my other 2








    Dirty F22A3 will be cleaned





    Odd centre console setup to mine due to higher centre tunnel for the 4ws



    It also has the rear caliper on the other side of the disc, facing forward, dont have pic of this yet, not taken the wheels off.


    Video of what the 4ws is like and does. This is a prelude, but identical system.

    http://www.youtube.com/watch?v=4JCks...layer_embedded



    So while the site was down, i have finished detailing and correcting the paint , im now working on the interior, not that it need much more than a ocd hoover leather condition, and trim wipe.

    There are 3 major damages to work on, front left corner, rear left corner, and this side panel below



    Correction hit 1



    Correction hit 2 90% perfect...it will do for now.







    Hope you guys like!

    More pics details progress to come etc
    Last edited by marcusv8thunder; 03-25-2014, 05:48 PM.


    UKDM 93 CB3 Page (1) H22A U2Q7 LSD
    UKDM 91 4ws Page (3) OEM Minter
    NOW H22A U2Q7 SWAPPED

    #2
    sooo jealous this thing must be fun as hell to drive

    Comment


      #3
      Will be getting this thing on the road this week, plan to get it MOT'd and taxed so that its legal, then drive this beaut!


      UKDM 93 CB3 Page (1) H22A U2Q7 LSD
      UKDM 91 4ws Page (3) OEM Minter
      NOW H22A U2Q7 SWAPPED

      Comment


        #4
        Very nice Marcus, your work on the door paint really turned out well! 4ws Accords don't exist in either Finland nor Sweden (never seen one at least). Take good care of her


        Euro CB7 2.2i [F22A3] --> [H22A7]

        Comment


          #5
          Thanks Robert! I will

          Well it went for its MOT, it failed, as expected. However not on much,

          Blowing exhaust, Front right ABS sensor, Excessive tyre age.

          Could be worst for a 20 year old car, so ill get a plate welded on that exhaust hole, get a new sensor on, and put on the 16" alloys from the silver Accord for the MOT. Ill swap the wheels back after, as they been quite picky there i think, the tyres have 4mm on them and only have small cracking in the outer tread blocks.

          Then its drivable!!


          UKDM 93 CB3 Page (1) H22A U2Q7 LSD
          UKDM 91 4ws Page (3) OEM Minter
          NOW H22A U2Q7 SWAPPED

          Comment


            #6
            Ah could be worse, those sensors are very expensive from Honda but maybe you'll find a used working one=)

            Good luck next time at the MOT, I'm sure it'll pass


            Euro CB7 2.2i [F22A3] --> [H22A7]

            Comment


              #7
              I'm so jealous!!! I really want 4ws and everything that this car has, lol. Keep up the good work.


              Instagram: n_buttz

              The Jeepster ____ The CB7 ____ The TE38 ____ The S13

              Comment


                #8
                Originally posted by lindiz View Post
                Ah could be worse, those sensors are very expensive from Honda but maybe you'll find a used working one=)

                Good luck next time at the MOT, I'm sure it'll pass
                Yep i got 14 days free retest, so i got to get that stuff done in that time, should be doable with a coupe of cups of tea!


                Originally posted by 90ACCORDLXGUY View Post
                I'm so jealous!!! I really want 4ws and everything that this car has, lol. Keep up the good work.
                will do im trying!

                Its difficult, you can either work loads, get lots of money, but then have no time to spend it! or work less, have time but cant buy any bits haha


                UKDM 93 CB3 Page (1) H22A U2Q7 LSD
                UKDM 91 4ws Page (3) OEM Minter
                NOW H22A U2Q7 SWAPPED

                Comment


                  #9
                  enjoy it bro

                  http://www.cardomain.com/ride/3222203/5

                  Comment


                    #10
                    Exhaust taken to a man with hardly any teeth to weld a little plate for the exhaust, will be done tomoro. Tick

                    ABS sensor on its way thanks to Jarrett . Tick

                    Tyres to swap tomoro.

                    Then ready for a retest

                    Dismantled the boot, took this shiny beaut out pumped it up, minty fresh, still has Honda balancing wieghts! Time warp!



                    Started on the engine bay,

                    Before



                    After



                    Just a pressure wash and degrease so far, more detailing and wire tidying to go tho.

                    Also had both front seats out and cleaned them and the carpet.

                    yuck



                    After, better, cant get ride of that white sqiggle, seems to be bleach or something, anyway its hidden under the seat!



                    UKDM 93 CB3 Page (1) H22A U2Q7 LSD
                    UKDM 91 4ws Page (3) OEM Minter
                    NOW H22A U2Q7 SWAPPED

                    Comment


                      #11
                      Loving the car, never seen ones of these. Wish I could see it in person. Also good job on the detailing
                      Sold to:
                      GunRunner,mtnickel,SanJoCaF22DrAcc,sikz6,daovangph otos,megarock15,
                      Purchased From :cb95spd,"sleepin"

                      Comment


                        #12
                        So yeah, update, 4 uniroyals have been added, its a long story, but i thought the tyres were fine, but i cant get it through MOT and then drive it without new ones, it mean another car wont have wheels!

                        New EBC black stuff pads, have been purchased.

                        So once this ABS sensor comes hopefully friday or monday, we can get this MOT passed.


                        UKDM 93 CB3 Page (1) H22A U2Q7 LSD
                        UKDM 91 4ws Page (3) OEM Minter
                        NOW H22A U2Q7 SWAPPED

                        Comment


                          #13
                          wow that centre tunnel goes all the way back. it like separates the driver from everyone else. no road headies for u marky LOL
                          <

                          (129)Transactions and counting

                          Comment


                            #14
                            Haha Tommi, it doesnt lend it self good to that, but then neither does any modern rwd car for that matter.


                            UKDM 93 CB3 Page (1) H22A U2Q7 LSD
                            UKDM 91 4ws Page (3) OEM Minter
                            NOW H22A U2Q7 SWAPPED

                            Comment


                              #15
                              It hasnt taken long but we got a good result here boys

                              MOT PASSED!!

                              Lets get this cruiser on the road!!


                              UKDM 93 CB3 Page (1) H22A U2Q7 LSD
                              UKDM 91 4ws Page (3) OEM Minter
                              NOW H22A U2Q7 SWAPPED

                              Comment

                              Working...
                              X