Announcement

Collapse
1 of 2 < >

ANY BUYING/SELLING IN THIS FORUM WILL RESULT IN AN INSTANT BAN!

Read the rules: http://www.cb7tuner.com/vbb/showthread.php?t=43956

Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
2 of 2 < >

Beginner Forum Rules - EVERYBODY read! (old and new members alike!)

Beginners start here. Once you have 30 worthwhile posts (off topic doesn't count) you may post outside of the Beginner forums. Any "whoring" (posting simply to raise your post count) will return your count to 0, or result in a ban.

These are the rules. Read them. Live by them.

1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.

2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.

3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.

4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.

The rules can and will be added to. Any updates will be marked in the title.

The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
See more
See less

Installing Keyless - Missing some wires

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Installing Keyless - Missing some wires

    I have a 1990 EX that I just installed an aftermarket Keyless entry system in. Through other threads on this forum I found various guides and wiring conversions that were really helpful. I was able to successfully install the module and have fully functioning remote Lock/Unlock + Parking Light Flash (Kinda wish it was Hazard flash instead of Parking... but it works).

    However, I'm missing on a couple things that I would like to have:
    1. Where is the Horn wire? It's supposed to be a Light Green/Blue wire in the steering column harness. However I was not able to find it. Maybe I was looking in the wrong spot?
    2. I have power windows, and the module has an Auto Window Up function. How do I properly hook this up? I've read some places that say I'll need a separate module to control this, and others that say to just run four wires from the window control board to the module. Which is correct?


    The module also has trunk pop functionality, but I know I'll need to rig up a separate solenoid or swap out the catch unit to make this work. I'll tackle that another time.

    #2
    Horn wire is under the dash under the steering column trim I believe. Since you have a '90, you don't have an airbag, and there should be one or two small gauge wires running under the trim. Those are your wires.

    Power windows, you can run 4 wires to the switch panel harness on the door. Make sure to diode isolate the 4 wires.

    YouTube Clicky!!

    Comment


      #3
      Yeah. After doing some searching and some testing; I'll need to do the following:

      1. The horn is the Blue/Red wire at the steering column plug, but it switches ground. The Module I have switches live and is normally grounded. So when I hook the module up directly to it the horn blasts constantly. I can get this to work by using a relay that is activated by the module and provides a ground to the horn circuit.

      2. Looking through the wiring diagram for the Power Windows, your suggestion is correct. Using diodes would be much better and more compact than the 4 Relay idea I had.

      Thanks!

      Comment

      Working...
      X