1990 to 1993 Accord Alignment Spec

[Chirs190E16v]

I thought you guys would like to know the alignment spec for the Accord so you can use it as a reference.

Accord alignment 1990 to 1993: except 1991 to 93 wagon.

Front Driver

Camber -1.0 to 1.0
Caster 2.0 to 4.0
toe -0.12 to 0.12
SAI N/A
Included angle N/A
Turning Angle Diff. N/A

Front Passenger
Same as the front driver

Cross camber N/A
Cross Caster n/a
Cross SAI n/a
total toe -0.24 to 0.24
cross turn diff. n/a

Rear driver
camber -1.0 to 0.0
toe 0.00 to 0.16

Rear Passenger
Same as the drivers rear

Cross camber N/A
Total toe 0.00 to 0.32
thrust angle n/a

This spec. came from the newest Hunter alignment machine as of 2008

[johnl]

Note though that for instance this:

"Camber -1.0° to 1.0°"

doesn't mean that it's OK to have one side at one end of the spec and the other at the other end. It means that if you have say -1° or +1° on one side then ideally you should have -1° or 1° on the other. I.e. the side to side angles should match, or at the very most the difference should be no greater than 0.5°.

[motobmx105]

so how low could you go before needing a camber kit?

[wed3k]

That's kind of dependent on the user. If u want to correct camber and put it to zero that's on you. A mild drop should give u a little over a degree.

Specs don't really mean anything becase caster can be used to compensate for road crown but still be within spec.

[motohead623]

What about for wagon?

(sorry for resurrecting an old post, didn't want to create a new thread)

[Night Wolf]

I got OEM specs sheet from honda, gotta see if I could upload the pic soon.