CB7Tuner Forums

Go Back   CB7Tuner Forums > Beginner forum -- New members post here! > Beginner Technical/Performance

Reply
 
Thread Tools Rate Thread Display Modes
Old 04-09-2011, 01:17 AM   #1
johnny12
CB7tuner Member
 
Join Date: Apr 2011
Posts: 30
johnny12 is cool... so far.
1991 accord motor help

I need to no how to set the tdc in my motor can head everything I took the head and cam and timing off and just found out you had to set it so what do I need to do now
johnny12 is offline   Reply With Quote
Old 04-09-2011, 01:57 AM   #2
MrSpeedy
CB7tuner Member
 
Join Date: May 2010
Location: Finland
Posts: 192
MrSpeedy is cool... so far.
Quote:
Originally Posted by johnny12 View Post
I need to no how to set the tdc in my motor can head everything I took the head and cam and timing off and just found out you had to set it so what do I need to do now
Put everything back (not the timing belt) there are markings on the camshaft pulley "up". And on the crankshaft and arrow that you should line also up with the camshaft. Also you need to line up the balancer shaft and it's got an red arrow that should line with the marking on the block. Then just put the timing belt on and check that markings are lined as mentioned. I think there is sticky for this if you need a more detailed info.

Edit: http://www.cb7tuner.com/vbb/showthread.php?t=55332

Last edited by MrSpeedy; 04-09-2011 at 02:17 AM.
MrSpeedy is offline   Reply With Quote
Old 04-09-2011, 02:25 AM   #3
johnny12
CB7tuner Member
 
Join Date: Apr 2011
Posts: 30
johnny12 is cool... so far.
So how do I set the cam or do I put the timing belt pully on and set the markings and what about the pistsions just leave them in the same spot or what just need more details bro
johnny12 is offline   Reply With Quote
Old 04-10-2011, 11:56 AM   #4
MrSpeedy
CB7tuner Member
 
Join Date: May 2010
Location: Finland
Posts: 192
MrSpeedy is cool... so far.
Quote:
Originally Posted by johnny12 View Post
So how do I set the cam or do I put the timing belt pully on and set the markings and what about the pistsions just leave them in the same spot or what just need more details bro
The camshaft pulley will only go in one way (on the camshaft). So you can't set that wrong. And when you turn the crankshaft your pistons will move. So when you line the markings then everything should be correct. I gotta ask, that how did you end up in this situation?! I mean, I think you should've first know the theory of what you are doing, before really doing it. Did you read the link I posted?
MrSpeedy is offline   Reply With Quote
Reply

Tags
1991 , accord , f22a4 , motor

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 12:55 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.