Calling All H22a4 swaps

[93exsedan]

Hopefully putting mine in next weekend(maybe). I have the whole motor and my cb, so what else will I need other than the ecu and adding a few wires??

[benjerman112]

Hopefully putting mine in next weekend(maybe). I have the whole motor and my cb, so what else will I need other than the ecu and adding a few wires??

shit nothing really get the wiring right and your good.

[benjerman112]

one of the tires on that hummer is on backwards haha.

lol didnt notice that!

[93JDMBeast]

Mine is stock , just finish putting it in recently got alot in mind for it tho im working on it

[N9netwoAccord]

forgot about this thread. i can add it to finally.






full rebuilt h22a4 (i rebuilt it, didnt pay anyone else to)
JDM pistons
I/H/E/
hondata intake manifold gasket

got 5000 miles on the rebuild

[benjerman112]

Mine is stock , just finish putting it in recently got alot in mind for it tho im working on it

sweet what do you have planned?

forgot about this thread. i can add it to finally.






full rebuilt h22a4 (i rebuilt it, didnt pay anyone else to)
JDM pistons
I/H/E/
hondata intake manifold gasket

got 5000 miles on the rebuild

love how the battery sits in the cd

[cb7pr]

Nope, the SH has the ATTS on the back of the block and the base doesn't. The oil filter is located differently as well.

anybody have a pic of this? I might have come up with a base, but not sure. Hoepfully it is. How hard is it to do the swap over with ATTS on a CB?

[Justin Patton]

More on my H22a4*

Installed*








It has been tuned on EcuTune...not dynoed yet for numbers.... BUT... today, I out ran a new bmw coupe.... My redline is set at 8300...and in 4th gear at 6500rpms I was doing 145, and the bmw backed off! wait til I boost it*

[Justin Patton]

I have a few more pics on my page also*

I Love my CB7s*

[Justin Patton]

Blue valve cover

My valve cover is the JDM SiR-T Accord Type R valve cover...I waited 3 months for it to ship from japan...Hehe* Dedication*

[benjerman112]

anybody have a pic of this? I might have come up with a base, but not sure. Hoepfully it is. How hard is it to do the swap over with ATTS on a CB?

A type sh block. I have an sh block but didn't use the atts box. I'd say get a base block changing the filter is a pain when its in the car.

I have a few more pics on my page also*

I Love my CB7s*

Dude the cb is looking good.

[ceebee9]

I got a 97 engine with manual tranny off a base model

so to do that swap from obd2 to obd1, did u have to do anything special or is it the other way around(obd1- obd2)?

[Night Wolf]

h23 dizzy, some plugs got swapped, sensors by crank seal removed, injector resistor removed

[Justin Patton]

A type sh block. I have an sh block but didn't use the atts box. I'd say get a base block changing the filter is a pain when its in the car.




Dude the cb is looking good.

Thanks Bro!

[ceebee9]

h23 dizzy, some plugs got swapped, sensors by crank seal removed, injector resistor removed

so that was it? can you pm me with specifics.... what plugs what sensors etc. why a h23 distributor? was this a personal preferense or necesscity?