Announcement

Collapse
1 of 2 < >

ANY BUYING/SELLING IN THIS FORUM WILL RESULT IN AN INSTANT BAN!

Read the rules: http://www.cb7tuner.com/vbb/showthread.php?t=43956

Myself, and the other mods have been very nice and lenient with the rules. We have been deleting threads, and giving out warnings. Some members didn't get the clue and re-posted over and over... Now ANY member buying or selling in this section will be banned... No IF's AND's or BUT's.
2 of 2 < >

Beginner Forum Rules - EVERYBODY read! (old and new members alike!)

Beginners start here. Once you have 30 worthwhile posts (off topic doesn't count) you may post outside of the Beginner forums. Any "whoring" (posting simply to raise your post count) will return your count to 0, or result in a ban.

These are the rules. Read them. Live by them.

1) Absolutely NO flaming! "Flaming" is an outright attack on a member. ALL questions are encouraged to be asked here, no matter how basic. Members with over 30 posts will be subject to a ONE WEEK ban if caught flaming in this forum (and yes, moderators can read deleted posts). Members with under 30 posts will be subject to a ONE DAY ban.

2) Use appropriate language. Racial or sexual slurs will not be tolerated. A ban will be issued at the discretion of the cb7tuner.com staff.

3) No items may be sold in the Beginner forums. Any "for sale" threads will be deleted.

4) Temporarily banned members will be PERMANTLY banned if they are found posting on another account.

The rules can and will be added to. Any updates will be marked in the title.

The rules for the overall forum can be found here:
http://www.cb7tuner.com/vbb/forumdisplay.php?f=144
Read them. You will be expected to follow them.
See more
See less

wheel liner removal?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    wheel liner removal?

    hi all i wish to remove the CB3 wheel liner off my dads accord. i can see most neat the wing/fender side are phillips screw however the other ones seem to be plastic welded on?
    are there any tips to remove these to get the liner off in 1 piece?

    Thanks

    #2
    Are you talking about the plastic front fender liners? All the plastic clips have the Phillips center screw (when you push/screw the screw in, it flares the little legs of the outer clip to keep it in the hole). Gently back the screw out most of the way, then you should be able to simply pull the whole clip out. The slots in some may be full of dirt and not look like screws, but from the factory they were all the same. You do have to take the mud flaps off first and they use metal screws.
    Last edited by Fleetw00d; 06-16-2018, 07:05 PM.
    90 LX 4dr 5 spd 396,014 (sold 1/1/2022) - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
    08 Element LX FWD AT 229,000 - MRT: fleetw00d : 2008 Honda Element LX - CB7Tuner Forums

    Comment


      #3
      Originally posted by fleetw00d View Post
      Are you talking about the plastic front fender liners? All the plastic clips have the Phillips center screw (when you push/screw the screw in, it flares the little legs of the outer clip to keep it in the hole). Gently back the screw out most of the way, then you should be able to simply pull the whole clip out. The slots in some may be full of dirt and not look like screws, but from the factory they were all the same. You do have to take the mud flaps off first and they use metal screws.
      Thanks that’s good to hear I’ll give it a go

      Comment


        #4
        i managed to get the wing off without removing the whole liner, but can see it must have been the dirt thanks

        Comment


          #5
          What wiring were you going after?
          90 LX 4dr 5 spd 396,014 (sold 1/1/2022) - MRT: http://www.cb7tuner.com/vbb/showthread.php?t=201450
          08 Element LX FWD AT 229,000 - MRT: fleetw00d : 2008 Honda Element LX - CB7Tuner Forums

          Comment

          Working...
          X