Okay so this Saturday I installed koni yellow struts and ground control coilovers and I'm worried about a couple things, I'm a noob so forgive me. I have 3 main questions.
1. I used my stock strut mounts and when putting the strut together, the spring was too short to compress is this normal? It just floats there until you drop the car on it.
2. Am I okay using the stock strut mounts? All I did was replace the rubber piece that the stock spring sat under with the top hats that ground control came with.
3. In the front the bump stops only give the strut about an inch maybe an inch and a half of room to depress, should I trim them to give it more room?
Sorry for the long thread guys, I just want this done right! Any input would be awesome!
1. I used my stock strut mounts and when putting the strut together, the spring was too short to compress is this normal? It just floats there until you drop the car on it.
2. Am I okay using the stock strut mounts? All I did was replace the rubber piece that the stock spring sat under with the top hats that ground control came with.
3. In the front the bump stops only give the strut about an inch maybe an inch and a half of room to depress, should I trim them to give it more room?
Sorry for the long thread guys, I just want this done right! Any input would be awesome!
Comment