CB7Tuner Forums

Go Back   CB7Tuner Forums > Beginner forum -- New members post here! > Beginner Technical/Performance

Thread Tools Rate Thread Display Modes
Old 05-20-2009, 11:10 PM   #1
Join Date: May 2009
Posts: 1
ecudorian is cool... so far.
Question bent axle into motor mount..

I feel like an idiot because I got it recently.
Is there anyone that could fix it for a good price?
I can't find under $1300.

I hydroplaned and hit a curb, it bent the axle into the motor mount and messed up the suspension. It made me extremely sad. But if I cant get a better price, I may have to salvage it.
ecudorian is offline   Reply With Quote
Old 05-20-2009, 11:15 PM   #2
CB7tuner Member
Join Date: Aug 2008
Location: Shediac, NB, Canada
Posts: 91
DriftMaster may have said something they shouldn't have...
Send a message via MSN to DriftMaster
Do like I did when I totaled my rear end. Had about $900 damages, fixed it myself for around $200.

1990 Honda Civic DX - Junked
1992 Honda Accord Si - Sold for parts
Next Honda coming.
DriftMaster is offline   Reply With Quote
Old 05-21-2009, 10:28 AM   #3
CB7tuner Member
Join Date: Sep 2008
Location: Western MA, USA
Posts: 1,642
batever is cool... so far.
Do you have any body damage or is it just the driver's side axle and suspension parts?

If you post a picture of the damage it would help.
From your post I'm guessing you're not currently mechanically inclined, and without doing the work yourself, I would guess it's not going to cost less than your lowest quote. Still, ask yourself where can you find a good car for $1300? If you actually have the cash, repair may be your best option, unless you can find a well functioning car for less $$.

If you have the time and interest, you could fix it for less-much less.

A new axle (remanufactured) could run you $180, other suspension parts (depending on what it damaged) could run you $150-$250, $20 for fasteners, a Junkyard motor mount (assuming yours is damaged) I don't know, less than $50, and your time, and add on $80 for a professional alignement when you are done.

The more expensive and/or specialized tools (torque wrench, for example), or tie rod separator) could be borrowed from a place like Autozone.

Much less than $1300 in that case.

However, it's what most people who don't normally take their cars apart would consider a "big job" and you would have to read up and learn, maybe watch some videos on the internet to get a sense of what's involved for replacing each part.

Last edited by batever; 05-21-2009 at 10:35 AM.
batever is offline   Reply With Quote
Old 05-21-2009, 10:36 AM   #4
CB7tuner Member
Join Date: Oct 2007
Location: New York City
Posts: 818
XcluziveAZN is cool... so far.
damn you suffer more damage then i do


that me

Dude new Axle is 70 at advance auto part

Junk yard is your best friend. I'm going there soon for my car parts. Call junk yard around and see if they have what you need and bargain with them

I recommend you buy hayne manual. It will help you taking thing apart like i did
XcluziveAZN is offline   Reply With Quote

auto , bent axle , mechanic , work

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 01:44 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.