|12-09-2009, 12:51 PM||#1|
Join Date: Nov 2009
Location: Grand Rapids, MI
The Official Nitrous Build Thread
If you're running nitrous, post up! This thread is dedicated to all who are spraying, even on stock engines. If you've got an all out N/A build with spray, or just basic bolt-ons, this is for you.
Post your setup, dyno numbers, and 1/4 and 60ft time. Also include a picture of your engine bay, so we can see what you're working with.
Also include a description of the tuning you've done in order to run the spray. Example, timing retardation, spark plugs, ECU tuning, etc.
Bottle Fed Motors FTW!
Last edited by CB7 Sleeper; 12-09-2009 at 12:56 PM.
|12-09-2009, 04:08 PM||#2|
Join Date: Mar 2005
Location: ThE yAy
Mine is H23A1 but in my lude, but anyone with an H23A1 in their cb7 can use it as a reference.
Engine 2.3L H23A1
Crower Stage 1 Cams
NGK Iridium One step colder Plugs
NGK Plug Wires
Max Bore TB
BB6 Type-S Intake
NOS Wet kit w/ Purge Valve
60 Shot jet
Its fully tuned using Neptune RTP
|12-09-2009, 04:39 PM||#3|
Join Date: Apr 2009
Location: Bennington, Nebraska
Stock F20c1 head and block
Stock fuel pump
Stock untuned ECU
Stock intake with K&N drop-in filter
Less than OEM grade tires-Kuhmo Ecsta ASX
Invidia test pipe
70 flywheel shot of nitrous- NOS 5120 dry kit
Best run at KCIR with a clutch starting to slip was a 13.3@106 with a 2.0 60'
Also ran a 13.5@107 and a 13.7@105
Click on the pictures to make them full size
Now I have added a Megan replica header and an AEM EMS standalone ECU. I will be getting an ACT 6 puck clutch and tune myself for a 125whp shot for next season.
|12-09-2009, 10:17 PM||#4|
Stock to my knowledge except for:
Exospeed stage one cam
SRI with a Tsudo mushroom filter
Spyder Automotive header, cat, 60 mm stainless exhaust
Cold Fusion wet kit, currently set up for a 50 shot
Timing retarded one degree
195/60/15 Potenza G009 on the front
163 whp off the bottle
Installed it a few months ago. Haven't sprayed her yet.
Off the bottle, she runs 15.87 @ 88.4
|07-23-2014, 02:34 AM||#7|
Join Date: Apr 2011
Euro-R intake manifold with euro-R cams
Highend header 2 1/2" exhaust
750 injectors on e85
Dry shot with .040 pill.
Take a look at my MRT!! Thanks
|Display Modes||Rate This Thread|